RF External Telemetry Dragonlink

Hardware help and support for the FrSky Taranis
Post Reply
grhosso
Posts: 5
Joined: Thu Aug 03, 2017 7:06 am
Country: -

RF External Telemetry Dragonlink

Post by grhosso »

Hello,

I leave a post here, because in Dragonlink tech support they tried to support me but I did not get positive reuslts and I am starting to think that my Taranis has a problem or maybe is a setup problem in the FC with the signal.

- With RF Internal I get Telemetry with FrSky RX (S.Port works great).

- With RF External I conect the Dragonlink TX properly setup according to the instructions provided by RCGroup, but I only get a list of parameters of telemetry and the values are 0, and I do not even get VFAS, I only get A1 and A2 voltage which are constant. The conections in the FC are right, and the UART too, nevertheless the FC is kakute F7, I have Serial IN connected to TX1 and the protocol is "FrSky" instead of Smartport.

What is strange is that the Taranis get the list of parameters but nothing is moving, they are static values, so something is not working.

In the OpenTX menu, in External RF I selected "SBUS", should I select other protocol XJT for example? Maybe is the inversion of the signal the issue?

OpenTX is 2.3.9 i think.. I do not remember, I do not have here my Radio..

Thank you for your help.

Post Reply

Return to “FrSky Taranis radio”