X9D+ RTC Issue....

Hardware help and support for the FrSky Taranis
Post Reply
Hozza
Posts: 3
Joined: Sat Jan 09, 2021 2:34 pm
Country: -

X9D+ RTC Issue....

Post by Hozza »

Hi,

Haven't used my X9D+ for awhile and found the RTC battery had gone flat, which I've now replaced. I set the time and date, but when I power off and back on the time and date have reset (not holding time and date)

Has anyone got any idea how to fix this issue?

Thanks in advance.

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: X9D+ RTC Issue....

Post by Kilrah »

Set it a 2nd time.
Hozza
Posts: 3
Joined: Sat Jan 09, 2021 2:34 pm
Country: -

Re: X9D+ RTC Issue....

Post by Hozza »

I've tried half a dozen times.
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: X9D+ RTC Issue....

Post by Kilrah »

Are you sure the new battery is actually good?

Also what firmware and version?
Hozza
Posts: 3
Joined: Sat Jan 09, 2021 2:34 pm
Country: -

Re: X9D+ RTC Issue....

Post by Hozza »

On the hardware page the RTC batt is showing 3.6v, it's a Duracell branded battery.

FW : opentx-xd9+
Vers : 2.3.9-otx
Date : 2020-06-14
EEPR : 219

ladislav005
Posts: 1
Joined: Thu Mar 11, 2021 7:21 pm
Country: -

Re: X9D+ RTC Issue....

Post by ladislav005 »

Replace the battery in the taranis. Unscrew the back cover and find this battery among the components: CR 1220 3V Lithium Coin Battery BR1220 DL1220 ECR1220 LM1220.

Post Reply

Return to “FrSky Taranis radio”