Hiya All
Have uploaded a new model to my Teranis, all good but. When any stick is moved left or right, up or down then you get a beep/warning. I can’t seem to find the solution, can anyone help.
Probably something daft I have missed.
Thanks in advance for any information.
Teranis sticks beep
Re: Teranis sticks beep
You have probably enabled the "center beep" for some controls.
Re: Teranis sticks beep
Thanks for the reply, I will check.
Re: Teranis sticks beep
You might have "stick center beep" active on your model. That is an option somewhere in the model settings
João
Sent from my BLN-L21 using Tapatalk
João
Sent from my BLN-L21 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Teranis sticks beep
Thanks jhsa, you and Kilrah were correct as this was indeed selected. All got a bit mixed up.
Anyway got a CCPM helicopter flybared loaded now with 3 flight modes and throttle hold/cut, had a test flight today and all ok.
This Teranis / OpenTX is different but slowly getting used to it, I may not have done this like others but all seems to work with warnings etc as well. Cheers for the help.
Anyway got a CCPM helicopter flybared loaded now with 3 flight modes and throttle hold/cut, had a test flight today and all ok.
This Teranis / OpenTX is different but slowly getting used to it, I may not have done this like others but all seems to work with warnings etc as well. Cheers for the help.