Page 1 of 1
X9D Firmware
Posted: Tue Nov 13, 2018 6:05 pm
by Popoff
Hi, is it possible to flash the above from international firmware to eu firmware and what problems I'm likely encounter please
Re: X9D Firmware
Posted: Tue Nov 13, 2018 10:48 pm
by tonnie78
Yes that's possible. Put the EU firmware in the FIRMWARE folder on your SD card and then long press the menu button. Then you enter the radio menu. Click page button untill you reach sd-card menu. Browse to your firmware folder, to the correct firmware and select update internal.
You then also need to flash your old non-eu receivers to eu software version of course.
Verstuurd vanaf mijn SM-G930F met Tapatalk
Re: X9D Firmware
Posted: Wed Nov 14, 2018 7:36 am
by Popoff
Thanks for that, as I've read conflicting stories. Anyway my friend will be happy to hear that, Tar
Re: X9D Firmware
Posted: Wed Nov 14, 2018 7:39 am
by tonnie78
I changed multiple X9D's to EU firmware without problem.
Verstuurd vanaf mijn SM-G930F met Tapatalk
Re: X9D Firmware
Posted: Wed Nov 14, 2018 8:52 pm
by rdeanchurch
Your receivers must match the RF module of your X9D, EU or Rest Of World (ROW). But the firmware in OpenTx does not care whether it is Eu or ROW. The RF module does not change with OpenTx firmware changes. My understanding is using ROW OpenTx firmware allows you to use D8 receivers. EU firmware may not. Being in the US I have no experience to verify my understanding.
It would be best to see if Kilrah or MikeB would jump in with a more knowledgeable answer.
Re: X9D Firmware
Posted: Wed Nov 14, 2018 9:06 pm
by tonnie78
In EU OpenTx firmware jou can choose to keep D8 available
Verstuurd vanaf mijn SM-G930F met Tapatalk