D4r-ii as wireless trainer for 2-X9D+ radios

Hardware help and support for the FrSky Taranis
Post Reply
Rcfiddy1
Posts: 3
Joined: Wed Aug 02, 2017 9:59 am
Country: -

D4r-ii as wireless trainer for 2-X9D+ radios

Post by Rcfiddy1 » Thu Aug 03, 2017 7:39 am

Ive read thru forums last 2 days and I must be missing something. I have bound the d4r to the student radio with jumper on 3-4 ch. Ch1 signal cppm. I than tried to use module bay pins 1-3-4(from top) cppm-vcc-gnd. Is this correct? Also what other setup is needed? I saw one post saying that he cut the heartbeat signal. Is this possible to use module pins or do I need to go into radio and solder to pads. I dont see ppm signal in options for input source.


User avatar
Kilrah
Posts: 10036
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: D4r-ii as wireless trainer for 2-X9D+ radios

Post by Kilrah » Thu Aug 03, 2017 8:39 am

Pin 1 is PPM output, you need pin 2.

Rcfiddy1
Posts: 3
Joined: Wed Aug 02, 2017 9:59 am
Country: -

Re: D4r-ii as wireless trainer for 2-X9D+ radios

Post by Rcfiddy1 » Thu Aug 03, 2017 8:25 pm

So your saying use pin 2 on Instructors radio?

User avatar
Kilrah
Posts: 10036
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: D4r-ii as wireless trainer for 2-X9D+ radios

Post by Kilrah » Thu Aug 03, 2017 10:06 pm

That's it...


Post Reply

Return to “FrSky Taranis radio”