X9E serial port location

Hardware help and support for the FrSky Taranis
Post Reply
User avatar
tilmanb
Posts: 347
Joined: Thu Oct 11, 2012 9:36 pm
Country: Germany
Location: Karlsruhe, Germany

X9E serial port location

Post by tilmanb » Mon May 22, 2017 3:14 pm

I was looking into wiring up an internal wireless trainer module via S-BUS.
It seems quite straight forward with the normal Taranis via the battery bay serial port.

But where is that port on the Taranis tray version (x9e)?

I see I could also use the module port. But I usually have a module in there. And also I would like to use it for flashing receivers.

PS: Flashing receivers. Is it only possible on the module port? It's quite inconvenient to open the transmitter ans pull out the module every time I have to do this.


User avatar
kalle123
Posts: 833
Joined: Sat Mar 29, 2014 10:59 am
Country: -
Location: Moenchengladbach

Re: X9E serial port location

Post by kalle123 » Mon May 22, 2017 3:29 pm

tilmanb wrote:
Mon May 22, 2017 3:14 pm
But where is that port on the Taranis tray version (x9e)?
Have a look at Helles manual. Page 408
5.jpg

User avatar
kalle123
Posts: 833
Joined: Sat Mar 29, 2014 10:59 am
Country: -
Location: Moenchengladbach

Re: X9E serial port location

Post by kalle123 » Mon May 22, 2017 3:33 pm

:mrgreen: ... and besides. THIS IS ESSENTIAL!

AND IN GERMAN.

viewtopic.php?f=92&t=3563&p=127191&hili ... al#p125178

User avatar
tilmanb
Posts: 347
Joined: Thu Oct 11, 2012 9:36 pm
Country: Germany
Location: Karlsruhe, Germany

Re: X9E serial port location

Post by tilmanb » Mon May 22, 2017 6:17 pm

Thanks.

Meine Güte das ist Mal ein Handbuch. Wusste gar nicht das es das gibt. Wow.


Post Reply

Return to “FrSky Taranis radio”