Page 1 of 1

Wireless Trainer Module - Availability?

Posted: Wed Apr 26, 2017 4:41 pm
by mapes12
Does anyone know of a module (or similar) to wirelessly connect two Taranis Tx's for student training. Both Tx's are running ERSky9X. I found this one but it's out of stock and I need a UK supplier.

http://alofthobbies.com/linker.html

It must be plug and play without the need for taking the back off and soldering etc.

TIA.

Mark

Re: Wireless Trainer Module - Availability?

Posted: Wed Apr 26, 2017 5:22 pm
by Kilrah
You can just take an SBUS or PPM receiver and hook it up with a male-male servo cable in the module bay, which is what this does in a slightly cleaner way.

Re: Wireless Trainer Module - Availability?

Posted: Wed Apr 26, 2017 5:51 pm
by mapes12
Kilrah wrote:
Wed Apr 26, 2017 5:22 pm
You can just take an SBUS or PPM receiver and hook it up with a male-male servo cable in the module bay, which is what this does in a slightly cleaner way.
Thank you Kilrah

1) In addition to channels 1 - 4 the instructor/student setup also passes control of channels PPM7 & PPM8 via the Mixer for functions on the model. Would the Rx setup you describe also accommodate this requirement?

2) Do you know where I can find a wiring diagram please?

Re: Wireless Trainer Module - Availability?

Posted: Thu Jun 15, 2017 3:49 am
by iflylilplanes
Just reading older threads and thought you may be interested in the system I've been using, have a look at this URL.. https://hobbyking.com/en_us/wireless-bu ... oller.html
I have used this with my mode 1 Taranis coupled with a mode 2 Spektrum and it works faultlessly, the only advice I can add about it is use short cables between it and the receivers (cuts down on the plumbing). There is a 4 channel version as well..
https://hobbyking.com/en_us/4-channel-t ... oller.html

Re: Wireless Trainer Module - Availability?

Posted: Fri Jun 16, 2017 10:17 pm
by sgwlm
i use the Linker from Aloft, it works fantastic.
be aware though that if you order one from Aloft, i got charged an extra £12.48, (vat £4.48 and £8.00 Royal Mail International Handling Fee) and had to go and collect it from my local sorting depot.
I also have the dual rx controller, i used it before getting the Linker, if you want it let me know, you can have it foc.