Usb connection is not working with my x9d turned off. It is recognized on pc, as I see stm32bootloader on device manager, but I cannot flash, since an error occurs.
Later I realize that download/file.php?mode=view&id=20935 is shorting.
What component is it and is it the problem?
thx
X9d back board component[SOLVED]
X9d back board component[SOLVED]
- Attachments
-
- IMG_20230305_094012__01.jpg (100.17 KiB) Viewed 659 times
Last edited by OctavioS on Mon Mar 06, 2023 11:40 am, edited 1 time in total.
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
Re: X9d back board component
That's a fuse, it's supposed to be short...
Re: X9d back board component
It figures...
Thx for your reply. Do you know what might be wrong for not being able to flash in dfu mode?
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
Re: X9d back board component
As long as the PC detects it the hardware should be fine and it's probably PC/driver problems.
Re: X9d back board component
I will try again, but i never had a problem with updating a tx in dfu mode, in fact, just before this one i updated another taranis and all went ok, but i will give it another try.
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
Re: X9d back board component
When i try to flash through eepskye, a message appears "Tx disk not mounted" and simply wont flash.
At this time the radio wont power on anymore. Its completely dead.
At this time the radio wont power on anymore. Its completely dead.
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
Re: X9d back board component [SOLVED]
So it was a cable problem. All working.
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.