Hi there.
Got my X9E and can make a model (electric airplane) and choose the right channels for the right control surfaces.
I have on a 2 way switch made a Throttle Cut and it works like a charm.
But how do i make so that my flaps go slowly down ?
I have tried in Special Functions-menu to get the flaps go up and down with a 3-way switch and that is okay. But i cant get them to move slowly.
Can anyone please explain how to do that (in a easy to follow way) ;o )
much appreciated thanks
Taranis X9E and flaps setup.
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Taranis X9E and flaps setup.
Why the special functions?
Set a mix to use the 3-pos switch as the source, then in the mix just add suitable values in the slow settings.
Mike.
Set a mix to use the 3-pos switch as the source, then in the mix just add suitable values in the slow settings.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 2
- Joined: Tue Feb 16, 2016 3:47 pm
- Country: -
Re: Taranis X9E and flaps setup.
Im new to Taranis and have basically no idea of how to program on this thing. But i like the quality and feel of it.
thanks for the quick reply.
thanks for the quick reply.
-
- Posts: 277
- Joined: Sun May 06, 2012 8:37 pm
- Country: -
- Location: Fond du Lac, WI
Re: Taranis X9E and flaps setup.
Have you downloaded Companion for the Taranis? It has a simulator that will show servo motions and rates. Very useful for learning how things work on the Taranis.