Limiting servo travel to one direction

[CraigKane]

Hi folks,

I want to limit the travel of the canards on my model so that they will only operate in one direction (canards move down when up elevon is applied).
Currently they are on a separate channel which is slaved to the elevon input but they are moving in both directions.

any help would be apreciated.

thanks

CK

[MikeB]

On the mix for their channel, just add the curve x>0 (or x<0). It may be called a function on later versions of openTx.

Mike.

[CraigKane]

Thanks Mike.
I'll give that a try and see how I get on.