Hi
After plugging my USB lead into my laptop and into Taranis I have a message on screen saying no sd card ? Whats all that about and you cant get rid of it until you remove lead.
You can still access the SD card internally ?
Any body else had this problem
Thanks in anticipation
SD Card not detected
-
- Posts: 750
- Joined: Tue Dec 27, 2011 11:22 pm
- Country: United States
- Location: Carson City, Nv
Re: SD Card not detected
yes, I've done it.
If the model you have selected is useing Logging then the USB will make the SD not available for logging.
It works fine for uploading or downloading Model/EEPROM or access by the PC to SOUNDS, BMP, LOG....
If the model you have selected is useing Logging then the USB will make the SD not available for logging.
It works fine for uploading or downloading Model/EEPROM or access by the PC to SOUNDS, BMP, LOG....
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
Re: SD Card not detected
The radio itself can't access the card while USB is connected, it's made available only to the PC. So yes, if you try logging when USB is connected you will get that error.
Re: SD Card not detected
Thanks for your replies great help I am just getting used to radio