Slider switches on Taranis sides ???.

General Help and support for the Taranis Radio.
Post Reply
User avatar
Steve71
Posts: 85
Joined: Sun Jul 07, 2013 7:51 pm
Country: United Kingdom
Location: Leicestershire

Slider switches on Taranis sides ???.

Post by Steve71 »

Hi all.

As well as flying EP models, I also fly gliders. I would like to assign the spoiler/camber mix to one of the slider switches on the side of the case......but cannot find anything in the switch assignments, that tells you how to use them ??.

Maybe its just an oversight by me........I dunno ?.

I do have spoilers and camber set up on SB and SG........but would prefer one of the sliders

Can anyone help ??.

Thanks,

Steve.
Slope soaring, EP Warbirds and high performance sports models.

"if it ain't broken, you ain't tryin' "

User avatar
Rob Thomson
Site Admin
Posts: 4543
Joined: Tue Dec 27, 2011 11:34 am
Country: United Kingdom
Location: Albury, Guildford
Contact:

Re: Slider switches on Taranis sides ???.

Post by Rob Thomson »

Its not a switch :-)

It is a bit more like a POT, so you work with it in a different way.

Use the mix source of LS or RS to access them.
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
User avatar
Steve71
Posts: 85
Joined: Sun Jul 07, 2013 7:51 pm
Country: United Kingdom
Location: Leicestershire

Re: Slider switches on Taranis sides ???.

Post by Steve71 »

Hi Rob.

Thanks for that........on my previous radios, they were known as slider switches !.

Where do I find them in the programming though........I can't see them listed anywhere ?.
Slope soaring, EP Warbirds and high performance sports models.

"if it ain't broken, you ain't tryin' "
User avatar
Rob Thomson
Site Admin
Posts: 4543
Joined: Tue Dec 27, 2011 11:34 am
Country: United Kingdom
Location: Albury, Guildford
Contact:

Re: Slider switches on Taranis sides ???.

Post by Rob Thomson »

Set your MIX source to LS or RS :-)

e.g. Normally you add a mix with the source of THR, MAX, AIL, etc...

Same place :-)
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
User avatar
Steve71
Posts: 85
Joined: Sun Jul 07, 2013 7:51 pm
Country: United Kingdom
Location: Leicestershire

Re: Slider switches on Taranis sides ???.

Post by Steve71 »

found it, many thanks
Slope soaring, EP Warbirds and high performance sports models.

"if it ain't broken, you ain't tryin' "

Daedalus66
Posts: 1844
Joined: Tue Dec 27, 2011 8:22 pm
Country: -
Location: Ottawa

Re: Slider switches on Taranis sides ???.

Post by Daedalus66 »

Steve71 wrote:Hi Rob.

Thanks for that........on my previous radios, they were known as slider switches !.

Where do I find them in the programming though........I can't see them listed anywhere ?.
Never heard them called switches. They've always been sliders any time I've encountered the term.
drummaker
Posts: 10
Joined: Sun Apr 30, 2017 3:32 am
Country: -

Re: Slider switches on Taranis sides ???.

Post by drummaker »

Why are RS and LS not supported on TX companion?
jtaylor
Posts: 170
Joined: Fri Nov 01, 2013 1:31 am
Country: -
Location: Wexford (Pittsburgh), PA

Re: Slider switches on Taranis sides ???.

Post by jtaylor »

drummaker wrote: Fri May 19, 2017 4:35 pm Why are RS and LS not supported on TX companion?
They are and have been for years. What radio and Companion version? And what are you trying to do?

Jim
drummaker
Posts: 10
Joined: Sun Apr 30, 2017 3:32 am
Country: -

Re: Slider switches on Taranis sides ???.

Post by drummaker »

sorry about the delay 2.2 is the version

You cannot find them in drop down in most places
User avatar
Kilrah
Posts: 11107
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Slider switches on Taranis sides ???.

Post by Kilrah »

Then you need to check they are enabled in the hardware page of radio settings.

Post Reply

Return to “General help (FrSky Taranis radio)”