I thought I felt pretty comfortable with the programming. I've set up 3 models now successfully. But I don't know what I did this evening to make this thing beep at me every 3 seconds. The screen blinks when the beep occurs and when the screen shuts off, the screen flashes when it beeps. Voltage is 8v and alarm is set at 7v. The beeping starts almost immediately after the splash screen.
What did I do?
Beeps at 3 second intervals
- Rob Thomson
- Site Admin
- Posts: 4543
- Joined: Tue Dec 27, 2011 11:34 am
- Country: United Kingdom
- Location: Albury, Guildford
- Contact:
Re: Beeps at 3 second intervals
Check your mixes.
You probably have an alert beep set on one of them.
You probably have an alert beep set on one of them.
Slope Soaring, FPV, and pretty much anything 'high tech'
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
...........if you think it should be in the wiki.. ask me for wiki access, then go add it!
Re: Beeps at 3 second intervals
Does the beeping also happen if you change model? If not then yes, you probably have set the "Warning" item in one of the mixers.
It might also be if you have set a timer, that timer is running, and has expired (would be shown negative and blinking on the main view).
It might also be if you have set a timer, that timer is running, and has expired (would be shown negative and blinking on the main view).
-
- Posts: 19
- Joined: Mon Jul 15, 2013 6:38 am
- Country: -
Re: Beeps at 3 second intervals
YES! Thank you. I knew it would be something simple.Rob Thomson wrote:Check your mixes.
You probably have an alert beep set on one of them.
Thanks again guys!
Brian