Recently purchased a used Taranis X9D Plus to use with a drone. I bought a R-XSR Receiver and updated the firmware to: RCSR_ACCST_2.1.0_FCC.frk . For location, I live in Los Angeles. On the Taranis, I updated the Internal RF (XJT D16) to ISRM-S-X9DP2019_2.1.0.frsk.
On the screen for VERSION, (bootloader) its: 2.3.12-otx (1eddde1f). I am not sure if I have match the firmware correctly in order for the transmitter and receiver to bind.
When I attempt to bind I get three solid lights, a blue, red and green.
I appreciate any input or help on this.
Issue binding R-XSR to Taranis X9D+
-
- Posts: 4
- Joined: Thu Jun 24, 2021 3:45 am
- Country: -
Re: Issue binding R-XSR to Taranis X9D+
Is this an X9D+ or an X9D+2019? You flashed module firmware for the 2019 version, that won't work if it's not the radio you have.
-
- Posts: 4
- Joined: Thu Jun 24, 2021 3:45 am
- Country: -
Re: Issue binding R-XSR to Taranis X9D+
Hello, thank you for the reply! How do I find out the exact model I have if it’s a Plus or Plus2019? Or SE?
Re: Issue binding R-XSR to Taranis X9D+
The 2019 version would have been sold as such, has an ACCESS logo on the screen bezel and a roller instead of buttons for menu navigation.
-
- Posts: 4
- Joined: Thu Jun 24, 2021 3:45 am
- Country: -
Re: Issue binding R-XSR to Taranis X9D+
On the bottom left of my screen it says a ACCST 2.4 GHz. On the bottom right it says -plus. Pretty sure I have a X9D+, not a 2019. What firmware should I be running on the radio and XJT RF module? Thanks for the help!
Re: Issue binding R-XSR to Taranis X9D+
You need OpenTX firmware for X9D+, and the RF firmware (XJT) is on the page for the X9D+ on frsky website.
-
- Posts: 4
- Joined: Thu Jun 24, 2021 3:45 am
- Country: -
Re: Issue binding R-XSR to Taranis X9D+
Ok. I have the Opentx hardware downloaded. But what’s confusing still is when I go to the FrSky page it says the most up-to-date firmware for the Radio OS for this model is 2018. V2.2.2018. ZIP file, inside are two EU_mode1 and two mode2 files and four NonEU_mode1 and mode2 files. I don’t know which file to install the Radios OS. EU is Europe and NonEU is the USA and everything else, right?
FrSky website says the FW for the XJT RF Module is ACCST D16 v2.1.0.
SD Card Contents date is 2018-05-28, x9dp-opentx v2.2.2-20180525
FrSky website says the FW for the XJT RF Module is ACCST D16 v2.1.0.
SD Card Contents date is 2018-05-28, x9dp-opentx v2.2.2-20180525
- Attachments
-
- E1BE8882-9B2F-4226-BFB8-53D30A4B0DF5.jpeg
- (8.17 MiB) Not downloaded yet