disabling a switch by a logical switch

General Help and support for the Taranis Radio.
Post Reply
PistaJ
Posts: 1
Joined: Sat Oct 10, 2020 12:47 am
Country: -

disabling a switch by a logical switch

Post by PistaJ » Sat Oct 10, 2020 1:03 am

I use reversible ESC in a glider to make landings shorter. The esc works normal from the middle to max (0 to 100) and reversed from middle stick to min. (0 to -100). To control that with the Thr stick (not centered) I created two curves and switch between them using a SF switch. To ensure I do not activate the switch when the motor is working, I would like to deactivate the switch when the Thr stick is above the min position. (using this ESC it means whenever the Thr signal is whatever else than 0
I thought I could use the logical switch to do that but I am missing the special function to deactivate a switch. Any help?


Post Reply

Return to “General help (FrSky Taranis radio)”