S8R Receiver will not go into self check mode

General Help and support for the Taranis Radio.
Post Reply
mikemcm61
Posts: 6
Joined: Fri Jan 10, 2020 1:05 am
Country: -

S8R Receiver will not go into self check mode

Post by mikemcm61 » Fri May 15, 2020 12:00 am

Hello, I hope someone can help me. I am unable to get my S8R receiver into self-check mode.
1st I tried assigning using the mixer screen X9d Lite radio to SWA as the source and then cycle through neutral 3 times quickly. Nothing happens.
2nd I powered up the transmiter and receiver and pressed the F/S (bind) button on the receiver and nothing happens there either.
Both times I made sure the throttle was all the way down and all sticks centered.

Mike


User avatar
Kilrah
Posts: 10598
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: S8R Receiver will not go into self check mode

Post by Kilrah » Fri May 15, 2020 7:18 am

You already asked that question a couple of days ago and got an answer, try that.

Post Reply

Return to “General help (FrSky Taranis radio)”