Taranis with the Vista drone

[Raythegreat]

Hi,

One of my friend gave me a the VISTA quadcopter from Dromina and with remote control (Tx) MR100, a very cheap remote.
I would like to use the Taranis instead of the Tx MR100.

Can you help me on giving me the mixing of each channel, order is usually for drones AIL, ELE, THR, RUD.
I tried the usual linear mode but of course it does not work. The throttle had a weird behavior only working from 0 to 50 from the -100 to 100 scale of Taranis.
I know there is a controller in the VISTA but I don't have access to it. There is a USB port available.

Can you help by telling me the operation points of the THR and mixing for each channel?
I have the instruction but don't understand them. I believe drones don't operate from -100 to 0? right?

Thanks
RTG

[Raythegreat]

Hi,

More info:

Attached is the PDF manual of the Vista.
Where I would like to get some help is about an explanation of the Setup section (page 2) in PDF file.
I have an RF module in the back of Taranis that can support the SLT compatibility so I simply need explication of the setup description to make it work on Taranis.
I'm OK with servo travel, servo reversing and Gyro but others are not clear to me.

I need an explanation only for the mixer menu.

thanks
RTG