Page 1 of 1

XSR receiver to bind for a drone sbus FC

Posted: Thu Oct 04, 2018 4:16 am
by Raythegreat
Hi

I have the Taranis and V2.2.1 and my receiver is a XSR SBUS 16 channels.

I have choices in the bind menu,

I put D16, ch1-ch16

But which one of these should I bind with if I want to control an FC sbus for a drone usinf the sbus 3 pins connector?.

Ch1-ch8 telemetry on'
ch1-ch8 telemetry off
ch1-ch16 telemetry on
ch1-ch16 telemetry off.

And in the mixer should I user channels 1 to 8 or 9 to 16?

Thanks
RTG

Re: XSR receiver to bind for a drone sbus FC

Posted: Thu Oct 04, 2018 6:38 am
by Kilrah
Telemetry as desired, the other doesn't matter as that's for the servo pins and does NOT affect SBUS.

Re: XSR receiver to bind for a drone sbus FC

Posted: Thu Oct 04, 2018 3:59 pm
by Raythegreat
Thanks Kilrah.

I found my problem, I need to configure the UART3 port on my FC. Forgot it.
Sorry my bad, I thought my binding did not work but it did.
And you are right, SBUS is not affected.

RTG