Hi all,
About the sensor lost warning:
I know there was a lot of discussions on the sensor lost issue with OpenTX 2.2.0 and later.
I read a few of them.
I have 2.2.1 with Taranis and receiver X8R and have occasionally the sensor lost warning.
My sensors are all FrSky: GPS V2 + Lipo monitor and RPM + temp + calculated sensors as well.
Is there any news about this issue other than I must check in the telemetry menu which sensor has glitched?
Cables and sensors telemetry seem all OK, difficult to trap or identify the glitches and which sensor is faulty.
Any new discovery? Any tricks to identify the faulty sensor?
Thanks
RTG
Sensor lost
Re: Sensor lost
There's a little * that blinks next to each sensor everytime a new value gets received from it, "Sensor lost" is played when one "didn't get a blink" for I believe 10 seconds.
-
- Posts: 284
- Joined: Sat Apr 16, 2016 11:33 pm
- Country: -
Re: Sensor lost
Thanks Kilrah,
It would be nice in the future to identify the sensor by sensing/saying the device ID.
As an example "sensor 5 lost" for a sensor with device ID = 5
Possible?
RTG
It would be nice in the future to identify the sensor by sensing/saying the device ID.
As an example "sensor 5 lost" for a sensor with device ID = 5
Possible?
RTG