How to update external XJT Module FW?

General Help and support for the Taranis Radio.
Post Reply
User avatar
Posts: 116
Joined: Tue Jul 09, 2013 6:44 am
Country: United Kingdom
Location: Gnosall UK

How to update external XJT Module FW?

Post by mapes12 » Sun Feb 25, 2018 9:07 am

I have a Taranis XD9 Tx running ErSky9X. For reasons I won't go into I need to fit it with an external XJT module. However, the Taranis Tx FW is the international derivative and the module is EU LBT. I need to flash the module with the international version of the FW. The only HowTo guide I can find is this one: ... y-9xr-pro/ but that is for the 9XR Pro. Will the same procedure work with the Taranis? Alternatively, I have a FrSky STK ( ) and wondered if this would do the update via my PC. I don't won't to try it ahead of asking here in case I fry something. TIA

User avatar
9x Developer
Posts: 15716
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: How to update external XJT Module FW?

Post by MikeB » Sun Feb 25, 2018 10:28 am

Yes, that guide is OK. The only differences on the Taranis are:
1. Choose the option "Update Ext. SPort"
2. There is no need to turn the power off and on as the Taranis has a soft power switch for the module and turns that on at the correct time.

ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

Post Reply

Return to “General help (FrSky Taranis radio)”