X** servo travel

General Help and support for the Taranis Radio.
Post Reply
drummaker
Posts: 10
Joined: Sun Apr 30, 2017 3:32 am
Country: -

X** servo travel

Post by drummaker »

I just recently noticed something which is quite odd

when I bind X series (includes S series as well) the servo stops moving when the value for the channel is about 70%
I have verified this is not the servo limit by binding Spektrum receiver to the taranis with spektrum module.... The servo travels MUCH farther bound to the Spektrum

extended limits make absolutely NO difference

Also I bount to a x7 with same results....

Is this a problem with opentx or are the frsky receivers fubar
or is there something else

HELP ME

drummaker
Posts: 10
Joined: Sun Apr 30, 2017 3:32 am
Country: -

Re: X** servo travel

Post by drummaker »

Never mind I thought I was using a s8r and x8r but was using 2 s8rs and had not set limits by system reset



anyone know if telemetry can be disabled on S8R?
User avatar
Kilrah
Posts: 11107
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: X** servo travel

Post by Kilrah »

I believe it can using the binding options in 2.2.1.

Post Reply

Return to “General help (FrSky Taranis radio)”