On X9D from new my left gimbal only functioned to about 80% left travel. Stick movement beyond this provided no further response. I tried recalibrating sticks. No joy. However at this stage the bootloader worked. I think. Maybe I'm rembering establishing bootloader on my QX7. Maybe it's a false memory. I bought this X9 some years ago. Can't remember exactly when. How can I identify if its an early version that didn't use the 3 finger bootloader entry method ? I believe that early X9D might not utilize the 3 finger bootloader entry ? Is this correct ?
I bought & replaced the left gimbal.
The 3 finger method - trims in/ then switch on - no USB connected yet - doesn't provide bootloader.
I put the faulty gimbal back in but still can't enter Bootloader with the 3 finger method.
Any suggestions please ?
Replaced gimbal - now can't enter Bootloader.
-
- Posts: 28
- Joined: Wed Oct 16, 2013 11:06 am
- Country: -
Re: Replaced gimbal - now can't enter Bootloader.
The trim connection is also part of the gimbal wiring. Is it properly connected?
Verstuurd vanaf mijn SM-G930F met Tapatalk
Verstuurd vanaf mijn SM-G930F met Tapatalk
Re: Replaced gimbal - now can't enter Bootloader.
Check the version screen, bootloader needs >2.0.
-
- Posts: 28
- Joined: Wed Oct 16, 2013 11:06 am
- Country: -
-
- Posts: 28
- Joined: Wed Oct 16, 2013 11:06 am
- Country: -
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
Re: Replaced gimbal - now can't enter Bootloader.
Version 2.0 and later, but I would suggest at least 2.1.19 for a good stable and advanced version. While you’re at it, why not go for 2.2?
-
- Posts: 28
- Joined: Wed Oct 16, 2013 11:06 am
- Country: -
Re: Replaced gimbal - now can't enter Bootloader.
Sure. Once I work out how to flash it without bootloader.
If you read my first posting on this topic you’ll see why I can’t.
If you read my first posting on this topic you’ll see why I can’t.
-
- Posts: 28
- Joined: Wed Oct 16, 2013 11:06 am
- Country: -
Re: Replaced gimbal - now can't enter Bootloader.
I have v1.1.02. So my memory of previous bootloading with the 3 finger start is a false memory. I also have an X7 which I have flashed this way & that’s where the memory comes from.Daedalus66 wrote: ↑Thu Sep 27, 2018 3:51 am Version 2.0 and later, but I would suggest at least 2.1.19 for a good stable and advanced version. While you’re at it, why not go for 2.2?
So how do I load 2.2 please ?