Ok, its been awhile!
I have an XRPro,just started to look at upgrading to Er9xsoftware,swithched on, power to indicator light,but no screen illumination, can anyone point me at postings etc on here, i recall some several years ago but cannot find them!
Thanks
XR Pro
-
stotty1111
- Posts: 233
- Joined: Mon Aug 11, 2014 5:56 pm
- Country: France
- Location: overlooking Douarnenez Bay Finistere
-
MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: XR Pro
I don't recognise the Tx you describe as "XR Pro", is this an X-lite?
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
stotty1111
- Posts: 233
- Joined: Mon Aug 11, 2014 5:56 pm
- Country: France
- Location: overlooking Douarnenez Bay Finistere
Re: XR Pro
ok, my error, missed the 9, its a
Tgy 9XR Pro
Hopefully I will get back to it either later today or tomorrow / or weekend!
Tgy 9XR Pro
Hopefully I will get back to it either later today or tomorrow / or weekend!
-
MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: XR Pro
Try starting in bootloader mode (power on holding the two horizontal trims towards the centre. See if the screen illuminates then, and if there is any text on the screen even if not illuminated.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
stotty1111
- Posts: 233
- Joined: Mon Aug 11, 2014 5:56 pm
- Country: France
- Location: overlooking Douarnenez Bay Finistere
Re: XR Pro
nope, nothing!
-
MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: XR Pro
Silly question 1, what is the battery voltage?
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
stotty1111
- Posts: 233
- Joined: Mon Aug 11, 2014 5:56 pm
- Country: France
- Location: overlooking Douarnenez Bay Finistere
Re: XR Pro
11.5v
tomorrow i will try a different sd card, if it works i'll reflash the system!
tomorrow i will try a different sd card, if it works i'll reflash the system!
-
MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: XR Pro
Try plugging the USB in when the power is off, then power on and see if anything is recognised over USB.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
stotty1111
- Posts: 233
- Joined: Mon Aug 11, 2014 5:56 pm
- Country: France
- Location: overlooking Douarnenez Bay Finistere
Re: XR Pro
no same, as before
i'll try remaking the ribbon cable joint feeding the screen later
i'll try remaking the ribbon cable joint feeding the screen later