Hi
I am using a Taranis D9+ to drive a HS-785HB servo for a sail winch on my yacht the problem is I am trying to reduce the number of turns from four full turn to 3.5 turns end to end. Can anybody guide me in the right direction, I have been struggling for days trying and I am not getting anywhere, also when I have got it working I will transfer it from a joystick to the rotor pot S2.
Regards Raggie
Taranis D9+ HiTec HS-785HB servo problem
-
- Posts: 3
- Joined: Mon May 25, 2020 5:03 am
- Country: -
-
- Posts: 3
- Joined: Mon May 25, 2020 5:03 am
- Country: -
Re: Taranis D9+ HiTec HS-785HB servo problem
Problem solved, Been reading for to much and got my brain bogged down, all running fine now.