Problem with binding ORX internal module with telemetry and turnigy 9x8c v2 Reciever

Cant get your radio to work? General Hardware issues?
Post Reply
User avatar
Fastayko
Posts: 3
Joined: Wed Sep 11, 2019 4:42 pm
Country: -

Problem with binding ORX internal module with telemetry and turnigy 9x8c v2 Reciever

Post by Fastayko »

As the title says, when i keep holding the bind button and start the radio i hear the binding sound but it doesnt bind ( the receiver led stays blinking ).

Module: OrangeRX 2.4Ghz Telemetry Module https://hobbyking.com/en_us/orangerx-2- ... tible.html
Receiver: Turnigy 9X 2.4GHz 8Ch Receiver (V2) https://hobbyking.com/en_us/turnigy-9x- ... er-v2.html
Radio: Turnigy 9XR PRO https://hobbyking.com/en_us/turnigy-9xr ... odule.html
Last edited by Fastayko on Wed Sep 11, 2019 6:13 pm, edited 1 time in total.

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Problem with binding ORX internal module with telemetry and turnigy 9x8c v2 Reciever

Post by Kilrah »

Unless there's an ORX module I don't know of, those are 2 completely different and incompatible systems.
User avatar
Fastayko
Posts: 3
Joined: Wed Sep 11, 2019 4:42 pm
Country: -

Re: Problem with binding ORX internal module with telemetry and turnigy 9x8c v2 Reciever

Post by Fastayko »

is there anyway to use them together ?
antlerhanger
Posts: 238
Joined: Tue Dec 25, 2018 3:19 am
Country: United States

Re: Problem with binding ORX internal module with telemetry and turnigy 9x8c v2 Reciever

Post by antlerhanger »

No way to use those together . You can get a multimodule or a dsm2/dsmx compatible rx . I use those orx modules with orange and lemon rx's and they work great

Allen

Post Reply

Return to “Hardware”