FlySky Paladin Radio

Cant get your radio to work? General Hardware issues?
Post Reply
User avatar
bob195558
Posts: 2377
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

FlySky Paladin Radio

Post by bob195558 »

FlySky Paladin PL18 2.4GHz AFHDS3 18CH Radio System w/FTr10 and FTr16s
FlySky Paladin Radio
FlySky Paladin Radio
Another radio on the market.
I like that the display screen at the top, but one other thing it needs is erSkyTx firmware.
(https://hobbyking.com/en_us/flysky-pala ... tm_term=LF)

Features:
• AFHDS 3 Protocol
• FTr10 and FTr16s receivers
• Metal Hall Gimbals
• 18 channels
• Six different model setups (Airplane, Helicopter, Glider, Delta Wing, Multicopter and Engineering Vehicles)
• 4300mAh battery (built-in), over 8 hours between charges
• Wireless charging, USB charging
• Voice/vibration prompts
• USB simulator (For use with flight simulation software)
• Copy and paste model data
• Customizable switches
• Trainer function
• Stable signal even with over 40 transmitters being used at the same time
FlySky Paladin Radio_b.jpg


Specs Paladin PL18:
Channels: 18
Model Type: fixed-wing, helicopter, crossing machine, multi-axis, engineering vehicle
RF: 2.4GHz
RF Power: < 20 dBm
2.4GHz Protocol: AFHDS3
Distance: >3km
Channel Resolution: 4096
Battery: 1S (3.7V) 4300mAh (built-in)
Charging Interface: Micro USB / wireless charging
Charging Time: 6h@5V/7h@2A (wireless charging)
Lifetime: > 8h
Low Voltage Warning: <3.7V
Antenna Type: Dual antenna
Display: HVGA 3.5" TFT, 320x480
Language: Chinese and English
Simulator: USB Simulator
Data Interface: USB, Non-standard interface (USART), PHJACK (PPM)
Temperature Range: -10 ° C - + 60 ° C
Humidity Range: 20%-95%
Online Update: support
Dimensions: 214x86.5x192 mm
Weight: 946g
Certification: CE, FCC ID: N4ZFT1800, RCM
FlySky Paladin Radio_c.jpg


Specs FTR10:
PWM channels: 10
RF: 2.4GHz
Protocol: AFHDS 3
Distance: >3500m
Antenna type: 103mm x 2
Power input: 3.5v-18V
RSSI: Yes
Data port: i-BUS/S-BUS/PPM/PWM/UART
Temperature: -15℃—+60℃
Humidity: 20%-95%
Update online: Yes
Size: 52x28x22mm
Weight: 22g
Certificate: CE,FCC ID: N4ZFTR1000
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).

mmilan
Posts: 171
Joined: Fri Mar 23, 2012 12:16 am
Country: United States
Location: Holly, Mi

Re: FlySky Paladin Radio

Post by mmilan »

Wouldn't it nice if erSky9x would be ported to this radio!!
User avatar
MikeB
9x Developer
Posts: 17992
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: FlySky Paladin Radio

Post by MikeB »

Well, to consider doing this I would need a radio and receiver (not cheap), some technical information (or the schematic would need to be reverse engineered), and some time!

Before that, I need to know what processor it is using.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

Post Reply

Return to “Hardware”