receiver for heli with VBRNEO

Cant get your radio to work? General Hardware issues?
Post Reply
schimaiw
Posts: 6
Joined: Tue May 21, 2019 8:21 pm
Country: -

receiver for heli with VBRNEO

Post by schimaiw »

Hi all,

I want to setup a heli with frsky receivers.
Currently I have a VBAR NEO flybarless with two spectrum satellites connected via s-bus. Both grant vertical and horizontal polarization and redundancy (the VBARNEO uses the strongest Signal of both).

No using e.g. an RX4 Receiver, there are two antennas ( I guess two Receiver Inputs) usable for e.g. horizontal and vertical polarization. But there is no Receiver redundancy. Option would be to use two of them with the vbar neo. Bu then I have to handle 4 (!) antennas…


How do you proceed ?

Thanks

Markus

Post Reply

Return to “Hardware”