Turn on X9E with USB connected?

Cant get your radio to work? General Hardware issues?
Post Reply
Lincon
Posts: 6
Joined: Wed May 01, 2019 8:30 am
Country: -

Turn on X9E with USB connected?

Post by Lincon »

Hello everyone,,
Is it possible to turn on the X9E while the USB cable is connected? I can't seem to do it, but not sure if there is some sequence that might allow it.
If it is not possible, is this something that I could change in the firmware? I'm fine with creating my own build if that is what I need to do to make this work. Pointers in the right direction are greatly appreciated.

Thank you,
Last edited by Lincon on Thu Dec 26, 2019 9:40 am, edited 2 times in total.
Top
User avatar
Kilrah
Posts: 11109
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Turn on X9E with USB connected?

Post by Kilrah »

No, would need hardware changes. When USB is connected with power off the processor is put in DFU bootloader mode through hardwided connections.

What's the purpose?
Top
Post Reply

Return to “Hardware”