No throttle

Cant get your radio to work? General Hardware issues?
Post Reply
User avatar
Posts: 22
Joined: Thu Feb 28, 2019 7:46 pm
Country: United States
Location: MA

No throttle

Post by rwhammer » Thu Feb 28, 2019 7:55 pm

I am a Newbie. I have a new Tower Hobbies Hellcat. I have a new Taranis QX7. I have a new FrSky X8R receiver. I have done the bind procedure after setting everything up. My Elevator control works, my Ailerons work, and my Rudder works, but not the Throttle. Does anyone have any ideas?

Posts: 698
Joined: Tue Dec 27, 2011 11:22 pm
Country: United States
Location: Carson City, Nv

Re: No throttle

Post by rdeanchurch » Fri Mar 01, 2019 2:01 am

Two viable candidates are
Bad calibration of throttle channel
Maybe you gave a throttle cut set on a new model.

The easiest way to get help is probably to post your .otx so someone can see if there is a setup error.
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1

Posts: 4
Joined: Wed Mar 27, 2019 1:45 pm
Country: -

Re: No throttle

Post by Yak38Forger » Thu Mar 28, 2019 7:14 am

I ran into the same issue with this model, it was a calibration issue. It's easier to mess up than you'd imagine, and it's behind most issues you'll run into!

... Or that's just me being clumsy and always messing up calibration.

Post Reply

Return to “Hardware”