FS-TH9x Schematics and FCC papers
FS-TH9x Schematics and FCC papers
This comes up once in a while so I thought I'd plonk the link here so we have it for posterity.
The FCCID is: VPOFLYSKY002
FCC GRANT OF EQUIPMENT AUTHORIZATION: https://fjallfoss.fcc.gov/oetcf/tcb/rep ... OFLYSKY002
OET EXHIBIT LIST: https://fjallfoss.fcc.gov/oetcf/eas/rep ... YSKY002%27
Schematics: https://fjallfoss.fcc.gov/eas/GetApplic ... ?id=860408
There are other radios produced by Flysky. To look those up simply search with the mfg being flysky and they'll all jump up.
The FCCID is: VPOFLYSKY002
FCC GRANT OF EQUIPMENT AUTHORIZATION: https://fjallfoss.fcc.gov/oetcf/tcb/rep ... OFLYSKY002
OET EXHIBIT LIST: https://fjallfoss.fcc.gov/oetcf/eas/rep ... YSKY002%27
Schematics: https://fjallfoss.fcc.gov/eas/GetApplic ... ?id=860408
There are other radios produced by Flysky. To look those up simply search with the mfg being flysky and they'll all jump up.
Z
BEWARE - WE ARE IN THE AIR!!!
What goes up... Should be controlled by a 9X!
BEWARE - WE ARE IN THE AIR!!!
What goes up... Should be controlled by a 9X!
-
- Posts: 29
- Joined: Wed Mar 13, 2013 11:24 pm
- Country: -
Re: FS-TH9x Schematics and FCC papers
All links broken or non-functional on 13 Mar 2013.
Get error as follows:\
Message from the NSAPI plugin:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
Get error as follows:\
Message from the NSAPI plugin:
No backend server available for connection: timed out after 10 seconds or idempotent set to OFF.
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: FS-TH9x Schematics and FCC papers
Ok, I see that it's posted already above. I'll leave it here anyway as a backup.
http://th9x.googlecode.com/svn/trunk/do ... mitter.pdf
SM
Sent from my iPod touch using Tapatalk.
http://th9x.googlecode.com/svn/trunk/do ... mitter.pdf
SM
Sent from my iPod touch using Tapatalk.
Re: FS-TH9x Schematics and FCC papers
This is one of the most usful posts for those that break their Tx.
Re: FS-TH9x Schematics and FCC papers
Has anyone got a more recent schematic that shows the circuitry associated with the 3.3Volt regulator that seems to be missing from the schematic in the opening post?
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: FS-TH9x Schematics and FCC papers
Check your pm's flaps 30. It may help
Sent from my iPod touch using Tapatalk.
Sent from my iPod touch using Tapatalk.
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: FS-TH9x Schematics and FCC papers
Have you got a copy of the circuit as produced by Gruvin?
I can re-post it if not.
Mike.
I can re-post it if not.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: FS-TH9x Schematics and FCC papers
I PM'd her a link Mike. I wasn't sure Gruvin wanted it still passed around on the forums? It's been a year or 2.MikeB wrote:Have you got a copy of the circuit as produced by Gruvin?
I can re-post it if not.
Mike.
I'm sure everyone new could use it if it ok to do so.
Sent from my iPod touch using Tapatalk.
Re: FS-TH9x Schematics and FCC papers
Thanks ShowMaster. Sadly that link doesn't seem to be active.
Mike - I would be grateful for a copy. The one that I have has in red the comment about the 78L05 pinout not being correct on the drawing. I cannot see anything of the 3.3Volt regulator on the drawings.
Mike - I would be grateful for a copy. The one that I have has in red the comment about the 78L05 pinout not being correct on the drawing. I cannot see anything of the 3.3Volt regulator on the drawings.
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: FS-TH9x Schematics and FCC papers
Humm, doesn't work?
Tonight when I get home I can save it as a PDF and email it if Mike doesn't post it.
Does this help?
Sent from my iPod touch using Tapatalk.
Tonight when I get home I can save it as a PDF and email it if Mike doesn't post it.
Does this help?
Sent from my iPod touch using Tapatalk.
Re: FS-TH9x Schematics and FCC papers
Cheers.. Now that is interesting. My schematic (which is the same as the one in the first post in this instance) shows pin 15 on u103/P8 connected to +5Volts. All the other components that are connected to U3 also go to +5Volts.
Yes it would help.
Yes it would help.
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: FS-TH9x Schematics and FCC papers
I think they used a 5V version of the LCD initially, then changed to a 3.3V version. This needed the 3.3V regulator and potential dividers in all the LCD signals.
Here is Gruvin's circuit diagram: Mike.
Here is Gruvin's circuit diagram: Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: FS-TH9x Schematics and FCC papers
Hello All
Here is the Schematic for TURNIGY 9X. Enjoy
Here is the Schematic for TURNIGY 9X. Enjoy
- Attachments
-
- Turnigy 9X Service Manual.pdf
- (90.5 KiB) Downloaded 1681 times
Re: FS-TH9x Schematics and FCC papers
TKS Dave!!!