Build Compile amod [Please help]

Help with any software/desktop related issues. e.g. companion9x, eePe, etc
darozas
Posts: 59
Joined: Fri Feb 17, 2017 10:56 pm
Country: -

Re: Build Compile amod [Please help]

Post by darozas » Wed Nov 15, 2017 2:05 pm

kmargos wrote:
Wed Nov 08, 2017 12:46 pm
Hi Mike,

Do you know if sometimes when connecting the TX the megasound does not work, and that has to turn it off and on again to work?

Marco,
Same here

If I connect radio on and off on quick it stops working.
Then I have to leave radio turned off for like 3 minutes to get it working again.

Regards


User avatar
MikeB
9x Developer
Posts: 16969
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Build Compile amod [Please help]

Post by MikeB » Wed Nov 15, 2017 4:03 pm

Are you using a Megasound board, as produced by HC1969?

Is it connected using serial (trim switches moved), or parallel?

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

darozas
Posts: 59
Joined: Fri Feb 17, 2017 10:56 pm
Country: -

Re: Build Compile amod [Please help]

Post by darozas » Wed Nov 15, 2017 5:00 pm

MikeB wrote:
Wed Nov 15, 2017 4:03 pm
Are you using a Megasound board, as produced by HC1969?

Is it connected using serial (trim switches moved), or parallel?

Mike.
I have "Oliver PCB " design here.

While back you helped me to solve the issues I was having with it.

Its runs over serial . Yes trim switches moved. If I turn on off on quick it stops working no Backlight no sound

Regards

User avatar
jhsa
Posts: 19304
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Build Compile amod [Please help]

Post by jhsa » Wed Nov 15, 2017 5:03 pm

Mike, could it be that is starting in bootloader mode somehow?
I remember reading about the same problem a few years ago, but can't remember what caused it or what the solution is :(

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
MikeB
9x Developer
Posts: 16969
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Build Compile amod [Please help]

Post by MikeB » Wed Nov 15, 2017 10:40 pm

Could be, that is controlled by the state of the serial Rx input at power on. If the serial Rx pin is low at power on, then the board starts in the bootloader.
I can't make either of my er9x radios fail in this way.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!


darozas
Posts: 59
Joined: Fri Feb 17, 2017 10:56 pm
Country: -

Re: Build Compile amod [Please help]

Post by darozas » Thu Nov 16, 2017 8:54 am

Well nothing to worry it works!!!. I just don't turn on off quick. It wont effect radio from functioning so im fine.

Anyways got new radio coming so don't really worry about this at all.

Keep it up Mike !!!


Post Reply

Return to “Software”