9XR PRO Bricked problem
9XR PRO Bricked problem
I wasn't carful when I tried to upgrade Bootlouder and the result is a blanck screen.
Then I fallowed manual "9XR Pro: Using SAM-BA to Restore a “Bricked” Transmitter" from 2014-02-12.
I installed SAM-BA v2-12 on my WIN XP OS. After erasing the chip, my PC recognised radio as Bossa Program Port (COM23)
I flashed radio with ersky9xr_rom.bin "ERSKY9X (revision 217)" but after reseting radio, the screen is still blanck.
I'd need some help on this in order to save the radio.
Best regards,
Boko
Then I fallowed manual "9XR Pro: Using SAM-BA to Restore a “Bricked” Transmitter" from 2014-02-12.
I installed SAM-BA v2-12 on my WIN XP OS. After erasing the chip, my PC recognised radio as Bossa Program Port (COM23)
I flashed radio with ersky9xr_rom.bin "ERSKY9X (revision 217)" but after reseting radio, the screen is still blanck.
I'd need some help on this in order to save the radio.
Best regards,
Boko
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: 9XR PRO Bricked problem
How did you do the actual flashing using SAM-BA? Did you use eepskye?
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: 9XR PRO Bricked problem
Thanks for a replay Mike.
I flashed the chip with SAM-BA.
Boko
I flashed the chip with SAM-BA.
Boko
Last edited by boko on Sun Nov 22, 2015 11:32 am, edited 1 time in total.
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: 9XR PRO Bricked problem
So you followed the instructions in the manual?
Did you execute the script "Boot from Flash (GPNVM1)” after flashing?
Mike.
Did you execute the script "Boot from Flash (GPNVM1)” after flashing?
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: 9XR PRO Bricked problem
Thanks Mike, now it works
I didn't see the bullet abot executing GPNVM1.
Manual is OK, I apolgize.
Now the radio works as new.
Thank you,
Boko
I didn't see the bullet abot executing GPNVM1.
Manual is OK, I apolgize.
Now the radio works as new.
Thank you,
Boko
Last edited by boko on Sun Nov 22, 2015 7:06 pm, edited 1 time in total.
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: 9XR PRO Bricked problem
Did you follow a link to get the manual that didn't mention the GPNVM1? If so, please let us know which link so we can make sure, if possible, an out of date manual is replaced.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 1
- Joined: Tue Dec 01, 2015 5:35 pm
- Country: -
Re: 9XR PRO Bricked problem
Not OP, but I had the exact same issue, the manual linked to here:- viewtopic.php?f=123&t=5581&p=83566&hili ... 3s8#p83566 (specificly the ' 9XR Pro Using SAM-BA to restore bricked Tx 2014-02-12.pdf' af the bottom of the first post.) doesn't say anything about the command you mentioned. After trying it I now have a working radio agin, Thanks!
Re: 9XR PRO Bricked problem
Hello, hope someone answers, totally bricked my 9xr pro installing Bluetooth. Tried with sam-ba, nothing happened on erase or flash, now the transmitter does not connect to computer.
Thanks, Bojan
Thanks, Bojan
Re: 9XR PRO Bricked problem
https://openrcforums.com/forum/download ... hp?id=6675
Just read this manual, will trie to erase te mainboard again. Will report back.
Just read this manual, will trie to erase te mainboard again. Will report back.
Re: 9XR PRO Bricked problem
Erase button on the 9xr pro worked like magic. Pressed on switching on, restored the flash so that samba could work its magic. I must tire to add Bluetooth again...
- Attachments
-
- Inked20210205_090240_800x369_LI.jpg
- Magic erase button
- (368.15 KiB) Not downloaded yet
Re: 9XR PRO Bricked problem
Hello ,
I come to "9XR PRO Bricked problem" that I have read completely without finding a solution!
My 9XR PRO is "super bricked". It doesn't light up at all! It is no longer recognized by any USB port.
For some time now it has switched off by itself and only comes on again when I disconnect and reconnect the battery.
It worked the last time when I put it away and when I took it back: nothing!
I am using a 2s battery and I have not done a reverse polarity, the current is reaching the board to which the switch (checked) is plugged.
I have tried all the ways to turn it on!
Does somebody have an idea ?
Thank you
I come to "9XR PRO Bricked problem" that I have read completely without finding a solution!
My 9XR PRO is "super bricked". It doesn't light up at all! It is no longer recognized by any USB port.
For some time now it has switched off by itself and only comes on again when I disconnect and reconnect the battery.
It worked the last time when I put it away and when I took it back: nothing!
I am using a 2s battery and I have not done a reverse polarity, the current is reaching the board to which the switch (checked) is plugged.
I have tried all the ways to turn it on!
Does somebody have an idea ?
Thank you
Re: 9XR PRO Bricked problem
Doesn't the blue light also turn ON?
Also, you are using a 2s battery? How did you connect it to the radio? The connector on the radio is for a 3s battery as far as I remember? So I guess a 2s balance charge connector won't work?
João
Also, you are using a 2s battery? How did you connect it to the radio? The connector on the radio is for a 3s battery as far as I remember? So I guess a 2s balance charge connector won't work?
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: 9XR PRO Bricked problem
Thanks Joao
The blue led does not light up, I tried with a 3s pack that does not work either.
The only fuse I found is good, and the reset button does nothing!
Stéphane
The blue led does not light up, I tried with a 3s pack that does not work either.
The only fuse I found is good, and the reset button does nothing!
Stéphane
Re: 9XR PRO Bricked problem
Hello,
Yeh! I've found the solution on another topic: https://openrcforums.com/forum/viewtopic.php?t=7668
It was the "famous" resistor R9
Everything is in order !
I bypassed it, what is the risk if I leave it like this?
Many thanks to Joao and to the forum for keeping 5 years old topics!
Stephane
Yeh! I've found the solution on another topic: https://openrcforums.com/forum/viewtopic.php?t=7668
It was the "famous" resistor R9
Everything is in order !
I bypassed it, what is the risk if I leave it like this?
Many thanks to Joao and to the forum for keeping 5 years old topics!
Stephane
Re: 9XR PRO Bricked problem
R9 is used to measure (Amp meter) the drain of the Tx in order to check the charge level, not necessary, you can short it...
Re: 9XR PRO Bricked problem
Nice that you have fixed it. Well done..
Yes, as said above, you can just short that resistor.
There are a couple situations that caused that resistor to go bad. One of them is inserting or removing the RF module while the radio is ON. Always turn the radio OFF before you do that..
João
Yes, as said above, you can just short that resistor.
There are a couple situations that caused that resistor to go bad. One of them is inserting or removing the RF module while the radio is ON. Always turn the radio OFF before you do that..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: 9XR PRO Bricked problem
Thank you Mike I got it working!