I just was prompted to install the latest version of OpenTX companion, 2.0.10.
My models 9XR-Pro models are no longer simulating the way they were in 2.0.08. It seems to me that the MAX value is now 10 instead of 100, so everything in my setups based on MAX being 100 no longer works. It's bad enough if this is in Companion's sim; is this actually in the firmware as well? If so, I hope those affected can't take off before they find the problem in the air.
I'm going back to the last known-good working firmware before I head out to the field, which for me was a nightly I used to test the new telemetry fixes for the 9xr-pro.
I'm attaching my .bin file. Try looking at the "BMini 250" model and exercising the ID0,ID1,ID2 switches while running under Companion 2.0.08, watching channel 6. Then try the same exact thing in Companion 2.0.10, watching channel 6.
Let me know if you need more data from me. I'll be running 2.0.08 to get flying today.
Bug? MAX now 10 not 100 in Companion 2.0.10 simulation
Bug? MAX now 10 not 100 in Companion 2.0.10 simulation
- Attachments
-
- 2.0.08 max 10 - 100 illustration.rar
- 9XR Pro models binary that should quickly illustrate Max 10/100 problem.
- (1.31 KiB) Downloaded 224 times
Re: Bug? MAX now 10 not 100 in Companion 2.0.10 simulation
I think that this was reported elsewhere and it is or will be fixed -----> viewtopic.php?f=45&t=6134
-
- 9x Developer
- Posts: 2764
- Joined: Fri Dec 30, 2011 11:11 pm
- Country: -
Re: Bug? MAX now 10 not 100 in Companion 2.0.10 simulation
Yes, it's fixed