EEPROM warning

Help with any software/desktop related issues. e.g. companion9x, eePe, etc
Post Reply
Stuart444
Posts: 30
Joined: Thu Nov 13, 2014 3:55 pm
Country: -

EEPROM warning

Post by Stuart444 »

I'm setting up my Tx and copying models, but only have about half the model memory slots in use. I have a 1GB SD card in it, if that's relevent.

Today the Tx comes up with this message on booting up -

"EEPROM WARNING
EEPROM low mem"

What's causing this? Is it just a matter of needing to use a larger SD card?

Thanks.

User avatar
Kilrah
Posts: 11107
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: EEPROM warning

Post by Kilrah »

Means your memory is full, models aren't stored on the SD so the only thing is have fewer of them, use the "archive" function, or simplify them so they take less space (usage is written next to the names).
Stuart444
Posts: 30
Joined: Thu Nov 13, 2014 3:55 pm
Country: -

Re: EEPROM warning

Post by Stuart444 »

Thanks, Kilrah. This seems to be a bit of a limitation given its overall power, and memory is so cheap now. One for the wish list.

Post Reply

Return to “Software”