I tried 2.3.9 tonight, and on the surface all was good. Except I was getting RX battery warnings.
Any setting of the voltage made no difference.
I deleted and re-discovered the telemetry sensor. Same as before
I deleted the logical switch to trigger the voltage readout and the special function to speak the low battery warning.
All with the same result.
All my models had the same behaviour
Everything else seemed to transfer perfectly.
Any ideas?
Thanks, Paul
RX Battery Telemetry After 2.3 Upgrade
-
- Posts: 3
- Joined: Tue Sep 01, 2020 3:56 pm
- Country: -
Re: RX Battery Telemetry After 2.3 Upgrade
It would help if you tell us which radio and firmware..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 3
- Joined: Tue Sep 01, 2020 3:56 pm
- Country: -
Re: RX Battery Telemetry After 2.3 Upgrade
I’ve fixed the problem
Thanks
Thanks
Re: RX Battery Telemetry After 2.3 Upgrade
It would be nice if you shared what the problem was.. It could perhaps help others with the same problem
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 3
- Joined: Tue Sep 01, 2020 3:56 pm
- Country: -
Re: RX Battery Telemetry After 2.3 Upgrade
I was using a DLG template that had a lua script also generating warnings outside of the normal logical switches and special functions.