Hi, I just accidentally flashed my Taranis X-Lite (2018) with the Taranis X-Lite Pro firmware with the OpenTX Companion for the first time. Why? Because I bought TBS Crossfire Module for it and it required the radio to be updated to get the crossfire executable. The result of my mistake was my transmitter not wanting to bind to any type of reciever. Including my X8R’s and the crossfire nano recievers. I have tried factory resetting it, re-flashing it with the correct firmware in every way possible. But to no help.
In my settings where you bind to recievers, I get the choices you would expect to see on the X-Lite Pro, not the X-Lite settings that i had before the wrong flashing. Anyone got any ideas here?
Photo 1:
https://imgur.com/flTTWss - Settings for OpenTX
Photo 2:
https://imgur.com/5sUPH3A - STM Bootloader works.
Photo 3:
https://imgur.com/CFvECfX
Photo 4:
https://imgur.com/ygI8aCO
Photo 5:
https://imgur.com/9u71T4s
Photo 6:
https://imgur.com/LhvD0mX - SD-card version.
Here you can see what my RF looks like in the menu:
https://imgur.com/gallery/LYnR92U
As you can see, I don’t think that is supposed to be there.
If I choose external RF i get these choices:
PPM, XJT, DSM2, CRSF, MULTI, R9M, R9MACCESS, R9MLite, R9ML ACCESS, R9MLP ACCESS, SBUS, XJT Lite
Sent from my iPhone using Tapatalk
Taranis X-Lite flashed with X-Lite Pro firmware
Re: Taranis X-Lite flashed with X-Lite Pro firmware
Looks correct for a non-pro X-Lite, the firmware for a PRO has either ACCESS or ACCST D16, not XJT. You can check the VERSION page of radio setup menus if you want more confidence.
Re: Taranis X-Lite flashed with X-Lite Pro firmware
Sent from my iPhone using Tapatalk
Re: Taranis X-Lite flashed with X-Lite Pro firmware
Yeah, that's all good.
Re: Taranis X-Lite flashed with X-Lite Pro firmware
Got any idea what could be the reason I can’t bind to my X8R recievers? What mode would you use for this?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: Taranis X-Lite flashed with X-Lite Pro firmware
Probably the radio's internal module firmware and the receiver's firmware don't match.
Re: Taranis X-Lite flashed with X-Lite Pro firmware
Any way to confirm this?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: Taranis X-Lite flashed with X-Lite Pro firmware
If you know what's on your receivers (1.x or 2.1, eu or international) then you can flash the radio's module to the corresponding one.