OpenTx memory value special function

Help with any software/desktop related issues. e.g. companion9x, eePe, etc
Post Reply
crissbo
Posts: 5
Joined: Sun Jan 27, 2019 7:42 pm
Country: -

OpenTx memory value special function

Post by crissbo » Sun Jan 27, 2019 8:00 pm

Hello guis,
on a Taranis X-Lite I would like to make sure that by operating a switch, this keeps on the output channel associated with a stick, the value at that moment read of that stick.

Let me explain: for a particular application I use the gas stick with return to the center, I would like to make sure that by operating a two-position switch, the gas remains fixed at the value that I had at the time (regardless of the subsequent positions of the stick), until I position the switch down.

Is this possibile?


rdeanchurch
Posts: 678
Joined: Tue Dec 27, 2011 11:22 pm
Country: United States
Location: Carson City, Nv

Re: OpenTx memory value special function

Post by rdeanchurch » Sun Jan 27, 2019 9:47 pm

In the mixer add a line after the Thr(gas) line
Chx Thr weight (+100%)
:= Chx Weight (100%) Switch Sy(up)

Note := is Replace in Companion
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1

crissbo
Posts: 5
Joined: Sun Jan 27, 2019 7:42 pm
Country: -

Re: OpenTx memory value special function

Post by crissbo » Mon Jan 28, 2019 7:53 am

Hi rdeanchurch,
in this way, however, by operating the switch, I bring the gas value to 100%, correct?

While I want the stored value to be the one that has the stick at the precise moment that I operate the switch, so it can be any value between -100% and + 100%.

User avatar
Kilrah
Posts: 10298
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: OpenTx memory value special function

Post by Kilrah » Mon Jan 28, 2019 9:02 am

No, it does just what you want.

crissbo
Posts: 5
Joined: Sun Jan 27, 2019 7:42 pm
Country: -

Re: OpenTx memory value special function

Post by crissbo » Mon Jan 28, 2019 9:30 am

ok, sorry for the misunderstanding, I try to do it!
Many thanks!


crissbo
Posts: 5
Joined: Sun Jan 27, 2019 7:42 pm
Country: -

Re: OpenTx memory value special function

Post by crissbo » Mon Jan 28, 2019 4:05 pm

I tried and it works as I wanted! Thanks again!

rdeanchurch
Posts: 678
Joined: Tue Dec 27, 2011 11:22 pm
Country: United States
Location: Carson City, Nv

Re: OpenTx memory value special function

Post by rdeanchurch » Mon Jan 28, 2019 7:13 pm

The replace Mix line takes 100% of the channel that is controlled by the throttle stick at the TIME you put SWy up.
So that channel is held at the value until you put the switch down.
Then the channel will jump to where the stick is presently positioned.
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1

crissbo
Posts: 5
Joined: Sun Jan 27, 2019 7:42 pm
Country: -

Re: OpenTx memory value special function

Post by crissbo » Wed Jan 30, 2019 8:32 am

thanks for the explanation, it's precise! ;)


Post Reply

Return to “Software”