Hello guis,
on a Taranis X-Lite I would like to make sure that by operating a switch, this keeps on the output channel associated with a stick, the value at that moment read of that stick.
Let me explain: for a particular application I use the gas stick with return to the center, I would like to make sure that by operating a two-position switch, the gas remains fixed at the value that I had at the time (regardless of the subsequent positions of the stick), until I position the switch down.
Is this possibile?
OpenTx memory value special function
-
- Posts: 750
- Joined: Tue Dec 27, 2011 11:22 pm
- Country: United States
- Location: Carson City, Nv
Re: OpenTx memory value special function
In the mixer add a line after the Thr(gas) line
Chx Thr weight (+100%)
:= Chx Weight (100%) Switch Sy(up)
Note := is Replace in Companion
Chx Thr weight (+100%)
:= Chx Weight (100%) Switch Sy(up)
Note := is Replace in Companion
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
Re: OpenTx memory value special function
Hi rdeanchurch,
in this way, however, by operating the switch, I bring the gas value to 100%, correct?
While I want the stored value to be the one that has the stick at the precise moment that I operate the switch, so it can be any value between -100% and + 100%.
in this way, however, by operating the switch, I bring the gas value to 100%, correct?
While I want the stored value to be the one that has the stick at the precise moment that I operate the switch, so it can be any value between -100% and + 100%.
Re: OpenTx memory value special function
No, it does just what you want.
Re: OpenTx memory value special function
ok, sorry for the misunderstanding, I try to do it!
Many thanks!
Many thanks!
Re: OpenTx memory value special function
I tried and it works as I wanted! Thanks again!
-
- Posts: 750
- Joined: Tue Dec 27, 2011 11:22 pm
- Country: United States
- Location: Carson City, Nv
Re: OpenTx memory value special function
The replace Mix line takes 100% of the channel that is controlled by the throttle stick at the TIME you put SWy up.
So that channel is held at the value until you put the switch down.
Then the channel will jump to where the stick is presently positioned.
So that channel is held at the value until you put the switch down.
Then the channel will jump to where the stick is presently positioned.
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
Re: OpenTx memory value special function
thanks for the explanation, it's precise!