Page 1 of 1

G-rx8 firmware update

Posted: Sun Apr 15, 2018 10:45 am
by andybourne
i have an stk and am able to update all my other rx's vis the sbus pin outs, however my G-rx8 does not work,

1. connect the stk to the pc (with the switch in the update position)
2. open the update aplication
3. find and select the firmware file
4. plug the rx sbus out pins in to the stk port 2
at this point it does not find the device..... can i have some help please?

Re: G-rx8 firmware update

Posted: Sun Apr 15, 2018 10:56 am
by Kilrah
S-Port, not SBUS.

Re: G-rx8 firmware update

Posted: Sun Apr 15, 2018 10:59 am
by andybourne
what pins?

Re: G-rx8 firmware update

Posted: Sun Apr 15, 2018 1:54 pm
by Kilrah
The S-port one (on the white connector), and any +/-...

Re: G-rx8 firmware update

Posted: Sun Apr 15, 2018 7:34 pm
by CatRovacer
Pay attention for check correctly connection betwenn STK & Rx: S, +, -
For some other FrSky Rx's cable has different pinout.
I tried DIY STK (arduino nano) But well ugraded via QX7 SPORT