G-rx8 firmware update

Help with any software/desktop related issues. e.g. companion9x, eePe, etc
Post Reply
andybourne
Posts: 2
Joined: Sun Apr 15, 2018 10:41 am
Country: -

G-rx8 firmware update

Post by andybourne » Sun Apr 15, 2018 10:45 am

i have an stk and am able to update all my other rx's vis the sbus pin outs, however my G-rx8 does not work,

1. connect the stk to the pc (with the switch in the update position)
2. open the update aplication
3. find and select the firmware file
4. plug the rx sbus out pins in to the stk port 2
at this point it does not find the device..... can i have some help please?

User avatar
Kilrah
Posts: 9661
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: G-rx8 firmware update

Post by Kilrah » Sun Apr 15, 2018 10:56 am

S-Port, not SBUS.

andybourne
Posts: 2
Joined: Sun Apr 15, 2018 10:41 am
Country: -

Re: G-rx8 firmware update

Post by andybourne » Sun Apr 15, 2018 10:59 am

what pins?

User avatar
Kilrah
Posts: 9661
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: G-rx8 firmware update

Post by Kilrah » Sun Apr 15, 2018 1:54 pm

The S-port one (on the white connector), and any +/-...

CatRovacer
Posts: 25
Joined: Tue Nov 14, 2017 11:53 am
Country: Russian Federation

Re: G-rx8 firmware update

Post by CatRovacer » Sun Apr 15, 2018 7:34 pm

Pay attention for check correctly connection betwenn STK & Rx: S, +, -
For some other FrSky Rx's cable has different pinout.
I tried DIY STK (arduino nano) But well ugraded via QX7 SPORT
good food & warm summer

Post Reply

Return to “Software”