Taranis X9D+ Bootloader
Taranis X9D+ Bootloader
Erroneously down loaded the wrong files and I now have a different bootloader-"Boot Loader V3.Ready". The radio works fine. The difference I have noted is the screen appearance and when I connect to computer it shows "connecting" not connected. But it is connected when the display shows connecting. Is there a procedure for getting the original boatloader back or is it unnecessary. I have tried but I cant remove it.
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Taranis X9D+ Bootloader
You have the bootloader from erskyTx, This is compatible with openTx (or slightly more accurately openTx bootloader is compatible with the erskyTx one as I wrote the bootloader originally).
You also get the feature of being able to run an "app". There are a couple of apps available, one to flash multiprotocol modules from the Tx and one to change the physical ID of SPort devices.
Mike
You also get the feature of being able to run an "app". There are a couple of apps available, one to flash multiprotocol modules from the Tx and one to change the physical ID of SPort devices.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Taranis X9D+ Bootloader
Thanks mike
- ridgerunner
- Posts: 4
- Joined: Sat Feb 02, 2013 11:04 pm
- Country: United States
- Location: Monroe, UT
- Contact:
Re: Taranis X9D+ Bootloader
Is there a HOWTO somewhere that describes how to use these bootloader apps? (I have several IRX4 MPMs I'd like to update and this looks to be a very trick way to do it.)
I have an X9DP-SE running OTX 2.2.3. Will I need to flash the whole ErSkyTX code, or can I just install your bootloader?
Thanks again Mike for all your cool contributions!
EDIT: Nevermind - I now see that there a bunch of other relevant posts/threads on this subject - (I should have looked first - it appears I'll need to also flash a bootloader onto the MPMs before I can flash from the TX.) I'll do my homework and come back if I have any more questions.
Carry on,
Jeff Roberson in Monroe UT