I have a new Eflite Timber X 1.2. I have installed a 7 channel receiver and have everything working except I can't seem to get the dual rates to work on the flaps when they are linked to the ailerons as full length ailerons. Dual rates and expo works on all other surfaces. Anyone done this setup before that can give me some guidance?
Thanks!
Sent from my SM-N970U using Tapatalk
Help With Full Span Aileron Rates
-
- Posts: 750
- Joined: Tue Dec 27, 2011 11:22 pm
- Country: United States
- Location: Carson City, Nv
Re: Help With Full Span Aileron Rates
Chances are you are using Ail sticks as in your flap mix, use the ail channel instead.
But there are other possibilities.
For best chance of getting help, post your .otx of the model.
But there are other possibilities.
For best chance of getting help, post your .otx of the model.
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
-
- Posts: 277
- Joined: Sun May 06, 2012 8:37 pm
- Country: -
- Location: Fond du Lac, WI
Re: Help With Full Span Aileron Rates
Do you have a switch to go from flaps+ ailerons to full span ailerons or are they full span ailerons all the time?
Re: Help With Full Span Aileron Rates
I'll upload the file when I get a chance. I've got it almost figured out.
There are flaps and ailerons. Set up to be full Span ailerons except when the flaps are deployed.
Sent from my SM-N970U using Tapatalk
There are flaps and ailerons. Set up to be full Span ailerons except when the flaps are deployed.
Sent from my SM-N970U using Tapatalk