Page 1 of 1
S8R problem but thought someone might know.
Posted: Mon May 11, 2020 3:48 pm
by Wildvortex
I have a S8R in one of my planes. The rudder servo, no matter what I do does not have full travel. If, I plug into another slot I get full travel and if I plug in a new RX on the Rudder channel I get full travel. Just not when on the S8R. I don't see any way to change it in the S8R setup.
Anyone know why that might be?
Re: S8R problem but thought someone might know.
Posted: Mon May 11, 2020 5:12 pm
by 3djc
You did not do the initial setup where it learn limits (the 3 time ch12 0 to 100), or you did not have the rudder move fully when doing those
Re: S8R problem but thought someone might know.
Posted: Mon May 11, 2020 9:34 pm
by Wildvortex
Yah, I had done that but on a previous model it was in. That was the problem. Although I can't get the selfcheck to work with channel 12 had to enter using the bind button. Was just coming back in to say that was the problem.