Horus X10S Express
Re: Horus X10S Express
I have the problem, that the X10 goes to Emergency mode when browsing model pictures or sound-files.
When configurating via Companion it works.
When configurating via Companion it works.
Re: Horus X10S Express
Many thanks for all your help & hard work. Today I've installed RC1
Not sure if I've found an issue or if it's lack of knowledge again........
When I select ISRM and Access, I don't get the proper menu When I select ISRM & Off I do
(I don't know if it's related to my earlier problem of being in the EU??)
Not sure if I've found an issue or if it's lack of knowledge again........
When I select ISRM and Access, I don't get the proper menu When I select ISRM & Off I do
(I don't know if it's related to my earlier problem of being in the EU??)
Re: Horus X10S Express
Where is the spektrum analyzer hidden? or does it just work with an external rf module?
openTX 2.3 RC3
openTX 2.3 RC3
Re: Horus X10S Express
Radio menu->Tools. Internal module must be on in the selected model.
Re: Horus X10S Express
hi
new to the site
just got a 10s express, it all seems over complicated and subject to a lot of crashes etc with the opentx , is it worth doing , what advantages are there ?, as there are loads of mixes etc , switch control already on the tx , it all seems to me (as a computer dunce) a bit too much playing around on computer and not enough flying, it seems over complicated or is this just me ?
any help would be great
p.s i have a notebook with windows 7 would this work with it ?
thanks
mick
new to the site
just got a 10s express, it all seems over complicated and subject to a lot of crashes etc with the opentx , is it worth doing , what advantages are there ?, as there are loads of mixes etc , switch control already on the tx , it all seems to me (as a computer dunce) a bit too much playing around on computer and not enough flying, it seems over complicated or is this just me ?
any help would be great
p.s i have a notebook with windows 7 would this work with it ?
thanks
mick
Re: Horus X10S Express
If you are using it as it was out of the box you are not using OpenTX but the FrSky operating system it comes with.
Re: Horus X10S Express
hi Kilrah
i know, i’m asking about the opentx, it seems to have a lot of problems, and hassle setting it up and i can’t see what the gain is ? , the more complicated the more chance of crashing !
it seems it for computer wizards and not just model flyers, i’m willing to give it a go
but from what i’ve read it all seems to be hassle, with little gain , am i right ? or just being negative
the screen on the radio just seems to rep excell with unusual jargon for radio set up
i know, i’m asking about the opentx, it seems to have a lot of problems, and hassle setting it up and i can’t see what the gain is ? , the more complicated the more chance of crashing !
it seems it for computer wizards and not just model flyers, i’m willing to give it a go
but from what i’ve read it all seems to be hassle, with little gain , am i right ? or just being negative
the screen on the radio just seems to rep excell with unusual jargon for radio set up
Re: Horus X10S Express
It doesn't "have problems" nor "crash".
It uses one way of doing things that some actually find much easier to use while some others don't. It lets you do anything you want as long as you know what you want.
We have no way of knowing in which side you would be. But since a simulator exists you could give it a try without having to touch your radio unless you're happy with what you see.
It uses one way of doing things that some actually find much easier to use while some others don't. It lets you do anything you want as long as you know what you want.
We have no way of knowing in which side you would be. But since a simulator exists you could give it a try without having to touch your radio unless you're happy with what you see.
Re: Horus X10S Express
thanks
i have tried simulator, i don’t seem to be able to get screen shots etc, just the transmitter outline with the sticks
will just wait until i have tried
i have tried simulator, i don’t seem to be able to get screen shots etc, just the transmitter outline with the sticks
will just wait until i have tried
-
- Posts: 9
- Joined: Sun Sep 29, 2019 8:16 am
- Country: -
Re: Horus X10S Express
You need to insert a microSD card with the SD contents for the version you loaded that are available from the OpenTX website loaded on it.
Re: Horus X10S Express
can anyone tell me why, the radio simulator does not work on the 2.2.3 for the express, it days not available for firmware yet , it worked yesterday fine , but not today
-
- Posts: 9
- Joined: Sun Sep 29, 2019 8:16 am
- Country: -
-
- Posts: 9
- Joined: Sun Sep 29, 2019 8:16 am
- Country: -
Re: Horus X10S Express
The radio will tell you what version it wants at boot.
What did you flash? You need the proper 2.3.0 firmware for X10 Express.
What did you flash? You need the proper 2.3.0 firmware for X10 Express.
-
- Posts: 9
- Joined: Sun Sep 29, 2019 8:16 am
- Country: -
Re: Horus X10S Express
Don't understand what you mean.
EU/FCC has nothing to do with OpenTX.
The X10 Express cannot be switched between EU and FCC. You have to buy the correct one.
EU/FCC has nothing to do with OpenTX.
The X10 Express cannot be switched between EU and FCC. You have to buy the correct one.
-
- Posts: 9
- Joined: Sun Sep 29, 2019 8:16 am
- Country: -
Re: Horus X10S Express
No, the internal module of the X10 Express is not switchable.
Re: Horus X10S Express
i have the updated version of the 2.3 opentx, and all set up, just cannot get the simulator to come up
i uninstalled and re-installed just to see, no different, seems there is so much hassle with this thing
why can we just have a radio we can use instead of all the geeky stuff, for no reason at all except to play on a computer, all the storing models etc , never lost a model on a radio ever, and it’s so much more simpler on radio
think will just go back to forus, and enjoy what the radio is for , for flying
i uninstalled and re-installed just to see, no different, seems there is so much hassle with this thing
why can we just have a radio we can use instead of all the geeky stuff, for no reason at all except to play on a computer, all the storing models etc , never lost a model on a radio ever, and it’s so much more simpler on radio
think will just go back to forus, and enjoy what the radio is for , for flying
-
- Posts: 9
- Joined: Sun Sep 29, 2019 8:16 am
- Country: -
Re: Horus X10S Express
i dont understand,work good this 2.3 opentx all to express radio?micka wrote: ↑Mon Sep 30, 2019 10:56 am i have the updated version of the 2.3 opentx, and all set up, just cannot get the simulator to come up
i uninstalled and re-installed just to see, no different, seems there is so much hassle with this thing
why can we just have a radio we can use instead of all the geeky stuff, for no reason at all except to play on a computer, all the storing models etc , never lost a model on a radio ever, and it’s so much more simpler on radio
think will just go back to forus, and enjoy what the radio is for , for flying
Re: Horus X10S Express
Looks like you got lucky, FrSky screwed up and distributed the change script by mistake in one of their updates:jonasfreonas wrote: ↑Mon Sep 30, 2019 10:04 am or tx not switchable EU to FCC,and FCC to EU ?
thanks
https://www.rcgroups.com/forums/showpos ... ount=12882
-
- Posts: 9
- Joined: Sun Sep 29, 2019 8:16 am
- Country: -
Re: Horus X10S Express
so what's in the band? is it turned off?Kilrah wrote: ↑Tue Oct 01, 2019 7:43 amLooks like you got lucky, FrSky screwed up and distributed the change script by mistake in one of their updates:jonasfreonas wrote: ↑Mon Sep 30, 2019 10:04 am or tx not switchable EU to FCC,and FCC to EU ?
thanks
https://www.rcgroups.com/forums/showpos ... ount=12882
Re: Horus X10S Express
Don't understand what you mean.
-
- Posts: 9
- Joined: Sun Sep 29, 2019 8:16 am
- Country: -
Re: Horus X10S Express
There is only one firmware release, so it's the same for EU and non EU.
-
- Posts: 9
- Joined: Sun Sep 29, 2019 8:16 am
- Country: -
Re: Horus X10S Express
They released a module update at the same time as the FrOS update, so yes you want to update FrOS first and then the module. That's unrelated to EU or FCC.
Re: Horus X10S Express
Hey Guys,
I´m new here, "HELLO" !
I´m also new with my Horus x10S E (with just ACCESS) and I have some questions...
1. Is it true, I can´t use my L9R anymore with the internal new ISRM ACCESS or only D16!?
2. I´d like to do an shortcut or take an switch for start my BF LUA script, because I don´t like to tap in few menue during the flight. Is there any way to config. an switch for this function?
regards
Ben
I´m new here, "HELLO" !
I´m also new with my Horus x10S E (with just ACCESS) and I have some questions...
1. Is it true, I can´t use my L9R anymore with the internal new ISRM ACCESS or only D16!?
2. I´d like to do an shortcut or take an switch for start my BF LUA script, because I don´t like to tap in few menue during the flight. Is there any way to config. an switch for this function?
regards
Ben