X12S Screen goes blank
Posted: Mon Apr 09, 2018 6:59 am
At present I have an X12S and when I load a particular model (attached) the screen goes blank (completely black, no backlight, nothing). I can hear normal voice responses so it seems that the model has loaded but I cannot see anything. The particular radio is a new X12S, production model AFAIK. this happens whether the model is loaded along with others and also when it is the only model on the radio. When the radio boots up with that model installed I see the splash screen, then the screen goes blank. When I shut down the screen comes to life with the shutdown screen. This happens when the model is on the SD card whether it is the active model or not. When that model is removed from the card the radio works as normal. The radio is running the latest production OpenTX 2.2.1 and the latest FRSKY RF Firmware.
I also have a previously beta radio that has been upgraded to production status. The same model (and settings) work normally.
The owner of the (apparently) faulty radio wants to know whether there is a hardware fault or whether it is something else. I'm hoping that someone else with a production radio can load the file and see whether or not any problem emerges. Thanks.
Of course I'd be grateful for any other insights.
I also have a previously beta radio that has been upgraded to production status. The same model (and settings) work normally.
The owner of the (apparently) faulty radio wants to know whether there is a hardware fault or whether it is something else. I'm hoping that someone else with a production radio can load the file and see whether or not any problem emerges. Thanks.
Of course I'd be grateful for any other insights.