Horus 10S Wrong PCB Detected

Post Reply
Rotems
Posts: 5
Joined: Wed Apr 27, 2016 1:09 am
Country: -

Horus 10S Wrong PCB Detected

Post by Rotems » Mon Nov 25, 2019 6:46 am

Hello,
After installing the Access Upgrade Module Kit (Didn't replace the PARA module yet) I've change the Open TX firmware to 2.3 Horus 10 Express.
After all, turning on the Tx I'm getting Wrong PCB Detected message.

What can be wrong

Thank you very much
Rotem


User avatar
Kilrah
Posts: 10298
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Horus 10S Wrong PCB Detected

Post by Kilrah » Mon Nov 25, 2019 6:56 am

What's wrong is that you don't have an X10 Express, so that's not the firmware you need...

You need standard X10, with internalaccess option selected.

Rotems
Posts: 5
Joined: Wed Apr 27, 2016 1:09 am
Country: -

Re: Horus 10S Wrong PCB Detected

Post by Rotems » Mon Nov 25, 2019 10:43 am

Hello Kilrah,

Thank you for your support.

I'm tryng to download opentx-x10-internalaccess-en.bin firmware and I'm getting "Invalid Board" message from the OpenTx Companion (Ver 2.3.2).
Please advise
Rotem

User avatar
Kilrah
Posts: 10298
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Horus 10S Wrong PCB Detected

Post by Kilrah » Mon Nov 25, 2019 11:03 am

For now it is only available in the 2.3.3 nightly builds.

Rotems
Posts: 5
Joined: Wed Apr 27, 2016 1:09 am
Country: -

Re: Horus 10S Wrong PCB Detected

Post by Rotems » Mon Nov 25, 2019 11:46 am

OK... How can I download it?

If I'm buying a new Horus 10 Express board then I can use the Open Tx Open TX for Horus 10 Express or other boards should be replaced?
Thank you
Rotem


User avatar
Kilrah
Posts: 10298
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Horus 10S Wrong PCB Detected

Post by Kilrah » Mon Nov 25, 2019 2:26 pm

OpenTX website, 2.3.3 nightlies post, download companion, install and configure it to download from the nightlies channel.

I'm not sure if the motherboard connections are identical. Anyway by replacing the only thing you would gain is ACCESS support for the external module.

Rotems
Posts: 5
Joined: Wed Apr 27, 2016 1:09 am
Country: -

Re: Horus 10S Wrong PCB Detected

Post by Rotems » Wed Nov 27, 2019 11:04 am

So currently there is no official OpenTX firmware for the Horus 10s Express?

Thank you
Rotem

User avatar
Kilrah
Posts: 10298
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Horus 10S Wrong PCB Detected

Post by Kilrah » Wed Nov 27, 2019 1:37 pm

There is official firmware for the X10 Express, yes.
There is none yet for the "old X10 with upgraded module" due to FrSky having made this upgrade module different from the one that is built in to the X10 Express, and them having gone through some trouble with it that was only solved a couple of days ago. The way they solved it required changes on OpenTX side, so it cannot yet be in a release.

superbogz
Posts: 7
Joined: Mon Oct 28, 2019 11:16 pm
Country: -

Re: Horus 10S Wrong PCB Detected

Post by superbogz » Sun Dec 01, 2019 5:44 pm

So I tried to use the opentx with the nightly build that is compatiable with the upgraded module for the old x10s with frsky isrm frimware installed and it still gives me a warning/stop with the message "Invalid Board". I am not sujre what I am doing wrong.

User avatar
Kilrah
Posts: 10298
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Horus 10S Wrong PCB Detected

Post by Kilrah » Mon Dec 02, 2019 4:30 am

You probably still left the radio type on X10 Express, or wrote the wrong file?

superbogz
Posts: 7
Joined: Mon Oct 28, 2019 11:16 pm
Country: -

Re: Horus 10S Wrong PCB Detected

Post by superbogz » Tue Dec 03, 2019 1:09 am

No I have it as x10s (non-express) with the accessinternal checked.

User avatar
Kilrah
Posts: 10298
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Horus 10S Wrong PCB Detected

Post by Kilrah » Tue Dec 03, 2019 1:22 am

What's the name of the file you're flashing?


Post Reply

Return to “openTx for FrSky radios”