eepSKYe
Re: eepSKYe
From my testing card size didn't affect mounting time.
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eepSKYe
Windows/Linux/Mac? My timing is on Win7 64-bit.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: eepSKYe
Same here.
Haven't checked lately though, it dates back to a year ago and the first Taranis mass storage tests. I tried pretty much everything I had between 512MB and 64GB.
Haven't checked lately though, it dates back to a year ago and the first Taranis mass storage tests. I tried pretty much everything I had between 512MB and 64GB.
Re: eepSKYe
Hi Kilrah, Maybe I've got a problem on my system. Any suggestions ?. Anything I can check ?. Mind you once mounted, it is extremely fast, reading or writing. I am running Rev 3 board.Kilrah wrote:From my testing card size didn't affect mounting time.
Stan.
He who knows not and knows not he knows not, is a fool: SHUN HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
Re: eepSKYe
Hmm didn't see the section this was in... I don't have a sky9x board, only taranis. But there's no fundamental reason for that to be slower on it, although the Atmel USB library might do things differently for some reason.
Re: eepSKYe
Mike,
I have flashed my other radio RevB board with R198. SD mounting time drastically reduced (4GB card), 3- 4 seconds. Meanwhile my TX with the 64GB card, (Rev 3 board), is still taking 35 - 40 seconds to mount. Once mounted though it is as quick on read/ write as the 4GB card.
Stan.
I have flashed my other radio RevB board with R198. SD mounting time drastically reduced (4GB card), 3- 4 seconds. Meanwhile my TX with the 64GB card, (Rev 3 board), is still taking 35 - 40 seconds to mount. Once mounted though it is as quick on read/ write as the 4GB card.
Stan.
He who knows not and knows not he knows not, is a fool: SHUN HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
Re: eepSKYe
did you try to swap cards to see if the problem moves with the card??
Sorry if you already tried it and I misunderstood your post..
João
Sorry if you already tried it and I misunderstood your post..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: eepSKYe
João,jhsa wrote:did you try to swap cards to see if the problem moves with the card??
Sorry if you already tried it and I misunderstood your post..
João
No I have not tried that yet. Remember it is impossible to retrieve the card from the RevB board without dismantling the radio and completely removing the main board (last resort kind of job), ie no slot cut in case card access. I have however acquired two new cards, 4GB and 64GB. When I get home tonight I will try them alternatively in the Rev 3 TX for comparison. I will post the results.
Stan.
He who knows not and knows not he knows not, is a fool: SHUN HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
Re: eepSKYe
Stan, I do apologize. Yes I forgot that little detail. I think some people did cut a slot for the card though.
Joao
Sent from my GT-I9195 using Tapatalk
Joao
Sent from my GT-I9195 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: eepSKYe
Joao,jhsa wrote:Stan, I do apologize. Yes I forgot that little detail. I think some people did cut a slot for the card though.
Joao
Sent from my GT-I9195 using Tapatalk
No problem. I will keep you posted.
Stan.
He who knows not and knows not he knows not, is a fool: SHUN HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
Re: eepSKYe
Mike,
I have just tested new 64GB and 32GB cards with identical files as my original 64GB card. I did also try to use a 4GBcard but it turned out to be faulty:
32GB card over 10 operations mounted in 19 -20 Secs.
64GB card over 10 operations mounted in 38 - 40 Secs.
That's fairly proportional to me. A 4GB card on this ratio basis would mount in approx 4 - 5 Secs. It seems the system may be reading/ verifying entire card contents before mounting. If so can it be sorted ?. No hassle, as I want to have that sort capacity anyway for future dev. Is there are any other checks I can make ?. I will leave the radio open for the time being just in case.
Stan
I have just tested new 64GB and 32GB cards with identical files as my original 64GB card. I did also try to use a 4GBcard but it turned out to be faulty:
32GB card over 10 operations mounted in 19 -20 Secs.
64GB card over 10 operations mounted in 38 - 40 Secs.
That's fairly proportional to me. A 4GB card on this ratio basis would mount in approx 4 - 5 Secs. It seems the system may be reading/ verifying entire card contents before mounting. If so can it be sorted ?. No hassle, as I want to have that sort capacity anyway for future dev. Is there are any other checks I can make ?. I will leave the radio open for the time being just in case.
Stan
He who knows not and knows not he knows not, is a fool: SHUN HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
Re: eepSKYe
Joao,
The 4GB turned out to be faulty (maybe poor quality), but I did try a new 32GB and 64GB class 10. The mounting time was fairly proportional. 32GB mounted in 19 - 20 Sec, the 64GB mounted in 38- 40 Secs. Have you got any other ideas I could check out ?.
Stan.
The 4GB turned out to be faulty (maybe poor quality), but I did try a new 32GB and 64GB class 10. The mounting time was fairly proportional. 32GB mounted in 19 - 20 Sec, the 64GB mounted in 38- 40 Secs. Have you got any other ideas I could check out ?.
Stan.
He who knows not and knows not he knows not, is a fool: SHUN HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
Re: eepSKYe
The real question is why use a 64GB card in the radio, seems like a huge waste
I never filled the old 512Mb card I have in my test radio...
I never filled the old 512Mb card I have in my test radio...
Re: eepSKYe
Stan I think the test you just did proves that all is ok and it just needs time to mount bigger cards. As Kilrah said you could use small cards as normally the files we use are fairly small. I have a 8Gb card on mine only because I didn't have smaller at the time. But I will get a 2Gb soon as I could use the other card on other applications. 2Gb should be more than enough even if one day I have background music
Joao
Sent from my GT-I9195 using Tapatalk
Joao
Sent from my GT-I9195 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: eepSKYe
Kilrah,Kilrah wrote:The real question is why use a 64GB card in the radio, seems like a huge waste
I never filled the old 512Mb card I have in my test radio...
Wrong question, wrong sentiment, odd comment. Why does anyone buy a Rolls Royce or a Ferrari for that matter ?. There is always an odd one. Maybe I'm He. BTW I am not complaining, just curious. I know it kills the cat everytime. What a wonderful world.
Stan.
He who knows not and knows not he knows not, is a fool: SHUN HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
Re: eepSKYe
Joao,jhsa wrote:Stan I think the test you just did proves that all is ok and it just needs time to mount bigger cards. As Kilrah said you could use small cards as normally the files we use are fairly small. I have a 8Gb card on mine only because I didn't have smaller at the time. But I will get a 2Gb soon as I could use the other card on other applications. 2Gb should be more than enough even if one day I have background music
Joao
Sent from my GT-I9195 using Tapatalk
No problem. I can live with it either way, as lond as I know it is cool. To start with I thought I had a problem, but it seems I was giving up just before it mounted. Now I know I can always make coffee and wait. Kill 2 birds with the same stone as they say. Prior to r198 the size never seem to matter as operation was normal with any size card I used, but as I say. NO PROBLEM.
Stan.
He who knows not and knows not he knows not, is a fool: SHUN HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eepSKYe
So can you confirm that when you used to connect, before the bootloader was done, the 64Gb card mounted in just a few seconds, not 35 or so?
If that is the case, I must have something different in the bootloader, it is supposed to be the same!
Mike.
If that is the case, I must have something different in the bootloader, it is supposed to be the same!
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eepSKYe
I've done a change to the bootloader (standard SKY board) when it reads blocks from the SD card. This seemed to me to speed up the mounting of a 4Gb card.
I've put a test version here:
http://openrcforums.com/forum/viewtopic ... 894#p65894
Because it is a change to the bootloader you need to use SAM-BA to flash it. I'm considering a method that would allow the bootloader to be updated from the main program.
Mike.
I've put a test version here:
http://openrcforums.com/forum/viewtopic ... 894#p65894
Because it is a change to the bootloader you need to use SAM-BA to flash it. I'm considering a method that would allow the bootloader to be updated from the main program.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: eepSKYe
when you say standard sky board you mean not the 9xr right?? Sorry, just to make sure that i don't have to flash this..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eepSKYe
Correct, it's really for Skylark to test with his 64Gb card. If it works it will also get into the 9XR in due course.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: eepSKYe
Mike, I confirm. I have been using the 64GB card for at least 2 months or so prior to R198. It mounted in reasonable time hardly noticeable to the performance of 2GB and 4GB I used before. That's why I was caught out. it took that long, I must have given up seconds before it would have mounted. Even so once it is mounted it is as blindingly fast as the other sizes I have tried. Hope this helps.MikeB wrote:So can you confirm that when you used to connect, before the bootloader was done, the 64Gb card mounted in just a few seconds, not 35 or so?
If that is the case, I must have something different in the bootloader, it is supposed to be the same!
Mike.
Stan.
Mike just saw your post. Will do asap and report back.
Stan.
He who knows not and knows not he knows not, is a fool: SHUN HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
Re: eepSKYe
Seemed like a reasonable question to me. A better analogy might be why drive around in a three-ton truck when a Honda Civic has more than enough room, is much quicker and costs a lot less?skylark wrote:Kilrah,Kilrah wrote:The real question is why use a 64GB card in the radio, seems like a huge waste
I never filled the old 512Mb card I have in my test radio...
Wrong question, wrong sentiment, odd comment. Why does anyone buy a Rolls Royce or a Ferrari for that matter ?. There is always an odd one. Maybe I'm He. BTW I am not complaining, just curious. I know it kills the cat everytime. What a wonderful world.
Stan.
Cheers!
Re: eepSKYe
Mike
As usual you are right on the button. The card mount time is now reduced to 16 seconds, consistent over 10 attempts.
Stan.
As usual you are right on the button. The card mount time is now reduced to 16 seconds, consistent over 10 attempts.
Stan.
He who knows not and knows not he knows not, is a fool: SHUN HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
Re: eepSKYe
AAAGGGHHH, You've missed the point, the snipe and the pun: "CHOICES", we have all been spoiled for it. I'm no exception. Are you not ?.Daedalus66 wrote:Seemed like a reasonable question to me. A better analogy might be why drive around in a three-ton truck when a Honda Civic has more than enough room, is much quicker and costs a lot less?skylark wrote:Kilrah,Kilrah wrote:The real question is why use a 64GB card in the radio, seems like a huge waste
I never filled the old 512Mb card I have in my test radio...
Wrong question, wrong sentiment, odd comment. Why does anyone buy a Rolls Royce or a Ferrari for that matter ?. There is always an odd one. Maybe I'm He. BTW I am not complaining, just curious. I know it kills the cat everytime. What a wonderful world.
Stan.
Cheers!
He who knows not and knows not he knows not, is a fool: SHUN HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
Re: eepSKYe
Yes, of course. Look at all the enormous technological capacity we bring to bear on our toy planes! Cheers.skylark wrote: AAAGGGHHH, You've missed the point, the snipe and the pun: "CHOICES", we have all been spoiled for it. I'm no exception. Are you not ?.
Re: eepSKYe
Yes, my sentiments exactly. All brought about by the hard work, dedication, tenacity and sheer love of the sport of MikeB et al. To be enjoyed by all. A BIG THANK YOU TO THE TEAM.Daedalus66 wrote:Yes, of course. Look at all the enormous technological capacity we bring to bear on our toy planes! Cheers.skylark wrote: AAAGGGHHH, You've missed the point, the snipe and the pun: "CHOICES", we have all been spoiled for it. I'm no exception. Are you not ?.
Stan.
He who knows not and knows not he knows not, is a fool: SHUN HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
He who knows and knows he knows, is a wise man : SEEK HIM
But he who knows not and knows he knows not, is a baby: TEACH HIM.
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
Re: eepSKYe
Very much so. I'll drink to that.skylark wrote: Yes, my sentiments exactly. All brought about by the hard work, dedication, tenacity and sheer love of the sport of MikeB et al. To be enjoyed by all. A BIG THANK YOU TO THE TEAM.
Stan.
Re: eepSKYe
Me too! Make mine an adult beverage. See map below
Re: eepSKYe
Hi All!
I have trouble uploading new firmware to my rev B board.
Currently running R88.......
I can read the transmitter alright trough eepsky i can read and write eeprom.
But i can´t update to some newer firmware.
I have mounted a 2Gb SD card with JHSA:s voicepack.(Thanks JHSA )
But cant read it since it´s to old firmware.
I´ve been searching for 3-4 hours now but i havn´t had no sucsess yet.
Probably super simple but not for me.
//Hasse.
I have trouble uploading new firmware to my rev B board.
Currently running R88.......
I can read the transmitter alright trough eepsky i can read and write eeprom.
But i can´t update to some newer firmware.
I have mounted a 2Gb SD card with JHSA:s voicepack.(Thanks JHSA )
But cant read it since it´s to old firmware.
I´ve been searching for 3-4 hours now but i havn´t had no sucsess yet.
Probably super simple but not for me.
//Hasse.
To support the forum:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=82QKZZN5ZC8JE
To support ER9X:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=82QKZZN5ZC8JE
To support ER9X:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eepSKYe
What version of eepskye are you using?
With recent versions, you will find a "review output" option in the burn menu. After a failure using SAM-BA to flash, this option displays the text produced when trying to flash. You can copy it out and post it here so we can see what might be going wrong.
Mike.
With recent versions, you will find a "review output" option in the burn menu. After a failure using SAM-BA to flash, this option displays the text produced when trying to flash. You can copy it out and post it here so we can see what might be going wrong.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!