eepSKYe
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: eepSKYe
I hate waiting for my computer to boot up.
Re: eepSKYe
After installing the latest ersky9x with samba, you will only need it again if some catastrophic event happens and you need to reset the chip.
You now have the bootloader to flash your radio, so just un-tick that samba option in the eepskye config menu and forget about it
João
You now have the bootloader to flash your radio, so just un-tick that samba option in the eepskye config menu and forget about it
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: eepSKYe
Good idea to unclick samba after I update my C Skyboard next.
I'm thinking there needs to be a new Skyboard thread 2016 with the latest parched samba with all the necessary files and eepeskye how to.
A search took me to many outdated locations and flashing info pages.
Mikes patches fixed me right up.
I'm thinking there needs to be a new Skyboard thread 2016 with the latest parched samba with all the necessary files and eepeskye how to.
A search took me to many outdated locations and flashing info pages.
Mikes patches fixed me right up.
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eepSKYe
I've put together the SAM-BA files for SAM-BA 2.12 all in a single .zip file complete with the directory structure:
Mike.erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: eepSKYe
Mike, better to add this file to er9x.com? Or it will be lost somewhere in this forum.
Thanks
João
Thanks
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: eepSKYe
Sorry for the question, but what is this used for? I know what SAMBA is.., but is this an update, or some change?
Custom 9x with M64/Telemetry Mod
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eepSKYe
It just puts all the data files needed for SAM-BA (2.12) in a single place. Showmaster recently needed to get SAM-BA running on a different PC, and while doing so, we found there didn't seem to be a single .zip file with everthing in it available. This just puts it all together.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: eepSKYe
Thanks,
So this is all for the SkyBoard right?
Nothing to do with Xtreme or Stock 9x Boards?
So this is all for the SkyBoard right?
Nothing to do with Xtreme or Stock 9x Boards?
Custom 9x with M64/Telemetry Mod
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eepSKYe
Yes, SKY board, 9XR-PRO and the AR9X board.
As a note, the AR9X board uses the SAM3S8 (512K flash) processor, like the 9XR-PRO. The original SKY board used the SAM3S4 (256K flash) processor.
Mike.
As a note, the AR9X board uses the SAM3S8 (512K flash) processor, like the 9XR-PRO. The original SKY board used the SAM3S4 (256K flash) processor.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: eepSKYe
ah got it... kinda like the Taranis... It uses Samba too...
Custom 9x with M64/Telemetry Mod
Re: eepSKYe
I don't think the taranis uses Samba?
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: eepSKYe
I think at one point it did with c9x? Not 100% but I do remember something like that... old age is kicking in...jhsa wrote:I don't think the taranis uses Samba?
João
Custom 9x with M64/Telemetry Mod
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eepSKYe
The Taranis and the 9Xtreme use "DFU" (Device Firmware Upgrade) not SAM-BA.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: eepSKYe
Haa, old age? you? You are making me feel old nowLTMNO wrote:I think at one point it did with c9x? Not 100% but I do remember something like that... old age is kicking in...jhsa wrote:I don't think the taranis uses Samba?
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- KAL
- Posts: 552
- Joined: Thu Oct 10, 2013 4:36 pm
- Country: Germany
- Location: somewhere near Rothenburg ob der Tauber
Re: eepSKYe
Hi Mike,
I never used the print function but the posts of 'gerhardp' in "er9x development"
about print function in eepe made me curious. So I tried it with eepskye.
I found that using this function causes eepSKYe to crash when sticky throttle cut
(safety switch type 'X') of the selected model slot is set.
To what extent the rest works OK I didn't test so far.
Edit: at least since rev 402, Oct 27 2014
Klaus
I never used the print function but the posts of 'gerhardp' in "er9x development"
about print function in eepe made me curious. So I tried it with eepskye.
I found that using this function causes eepSKYe to crash when sticky throttle cut
(safety switch type 'X') of the selected model slot is set.
To what extent the rest works OK I didn't test so far.
Edit: at least since rev 402, Oct 27 2014
Klaus
( TH9X / 9XTreme / FrSky DHT / Spektrum / Multi / RotEnc )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
( 9XR PRO / erSKY9x / FrSky DHT / Spektrum / Multi / RotEnc / P3 as Slider )
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eepSKYe
I've fixed the print crash.
While there may well be more things to add/change, I have just released eepe/eepskye r419. All the source files are up to date on the master branch on Github and the downloads are on www.er9x.com.
The plan for the future is not to take as long between releases and to just do a few changes between them so it is under better control.
Mike.
While there may well be more things to add/change, I have just released eepe/eepskye r419. All the source files are up to date on the master branch on Github and the downloads are on www.er9x.com.
The plan for the future is not to take as long between releases and to just do a few changes between them so it is under better control.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 313
- Joined: Thu Dec 29, 2011 10:18 am
- Country: Australia
- Location: Cooloola Cove, Australia
Re: eepSKYe
Mike, the Linux version indicates that it is r420. Just a mention as it makes no difference to the operation of the program.
Re: eepSKYe
Hi,
I have a 9XR-Pro with stock firmware.
I run Mac OSX 10.6.8
Can anyone advise which version of eepskye will work on 10.6.8 snow leopard ?
Thanks
I have a 9XR-Pro with stock firmware.
I run Mac OSX 10.6.8
Can anyone advise which version of eepskye will work on 10.6.8 snow leopard ?
Thanks
Re: eepSKYe
I was trying to open a .eepm file downloaded from a thread there, but when i used eeskye r419 to open it, nothing shows up, there is indication there is window 1, but nothing, no model. How can I open a eepm file?
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eepSKYe
Have an eeprom window open, right click on an empty model slot and select "Load Model Settings". Then select the eepm file.
eepm files are just a single model.
Mike.
eepm files are just a single model.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eepSKYe
I don't have a MAC, so can't directly answer. Have you tried some versions and found they don't work?schliden wrote:Can anyone advise which version of eepskye will work on 10.6.8 snow leopard ?
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: eepSKYe
Hi Mike,
I can only see the latest version.. (which does not work)
Can you point me to where I can DL some older versions ?
Thanks
I can only see the latest version.. (which does not work)
Can you point me to where I can DL some older versions ?
Thanks
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eepSKYe
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: eepSKYe
Mike,
I have tried each version back as far as eepskye.dmg r399. (Mar 26, 2014)
I can't find anything older....
None of them work on 10.6.8 (Snow Leopard)
From the look of the info.plist files the last one was compiled under OSX 10.9
Is there any reason that it cannot be compiled to run on older versions of OSX ?
Thanks
I have tried each version back as far as eepskye.dmg r399. (Mar 26, 2014)
I can't find anything older....
None of them work on 10.6.8 (Snow Leopard)
From the look of the info.plist files the last one was compiled under OSX 10.9
Is there any reason that it cannot be compiled to run on older versions of OSX ?
Thanks
Re: eepSKYe
I just tried DL version r396 0f eepe.dmg and that does install and work... but unfortunately, there is no version of eepskye.dmg in this or any older revs ..
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eepSKYe
I have no idea!schliden wrote:Is there any reason that it cannot be compiled to run on older versions of OSX ?
Someone else does the compile for the MAC. I've asked them what the situation is regarding compiling for older versions of OSX.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: eepSKYe
Thanks Mike...
Perhaps that Mac maintainer could also advise which minimum version of OSX is required.
Perhaps that Mac maintainer could also advise which minimum version of OSX is required.
Re: eepe v420/v419 and 9extreme board
I have on a TURNIGY9x the v2.4 board from smartiepart. I have exported my models and try to flash onto another Turnigy 9x with the 9xtreme board installed. Unfortunatly I cannot get a usb connexion to the 9xtreme board. EEPE works perfect with the V2.4 board. Where is the trick ? HELP. When I connect my usb cable i see 9Xtreme in the middle of the screen (radio) and r00.3 bottom left of the radio's screen. Does a new driver, or new eepe version must be installed. Or the pinout of the usb is badly soldered ? Thx for a fast feedback. Thierry (BE)
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: eepSKYe
Please keep to just one thread, I've answered on your other post already.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: eepSKYe
Some of you might find this helpful. If you know already how to install eepskye and download the radio eeprom into eepskye, don't waste your time watching it
João
https://www.youtube.com/watch?v=wNJPUZcqZRs
João
https://www.youtube.com/watch?v=wNJPUZcqZRs
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW