eepSKYe

Post by **ShowMaster** » Sun Dec 06, 2015 6:26 am

I hate waiting for my computer to boot up.

Post by **jhsa** » Sun Dec 06, 2015 11:13 am

After installing the latest ersky9x with samba, you will only need it again if some catastrophic event happens and you need to reset the chip.
You now have the bootloader to flash your radio, so just un-tick that samba option in the eepskye config menu and forget about it

João

Post by **ShowMaster** » Sun Dec 06, 2015 7:08 pm

Good idea to unclick samba after I update my C Skyboard next.
I'm thinking there needs to be a new Skyboard thread 2016 with the latest parched samba with all the necessary files and eepeskye how to.
A search took me to many outdated locations and flashing info pages.
Mikes patches fixed me right up.

Post by **MikeB** » Sat Dec 19, 2015 12:29 pm

I've put together the SAM-BA files for SAM-BA 2.12 all in a single .zip file complete with the directory structure:

samba_9x.zip: 19-Dec-2015 12:32; (36.96 KiB) Downloaded 283 times

Mike.

Post by **jhsa** » Sat Dec 19, 2015 12:37 pm

Mike, better to add this file to er9x.com? Or it will be lost somewhere in this forum.
Thanks

João

LTMNO · Post by **LTMNO** » Wed Dec 23, 2015 4:41 am

Sorry for the question, but what is this used for? I know what SAMBA is.., but is this an update, or some change?

Post by **MikeB** » Wed Dec 23, 2015 10:20 am

It just puts all the data files needed for SAM-BA (2.12) in a single place. Showmaster recently needed to get SAM-BA running on a different PC, and while doing so, we found there didn't seem to be a single .zip file with everthing in it available. This just puts it all together.

Mike.

LTMNO · Post by **LTMNO** » Wed Dec 23, 2015 2:19 pm

Thanks,
So this is all for the SkyBoard right?
Nothing to do with Xtreme or Stock 9x Boards?

Post by **MikeB** » Wed Dec 23, 2015 2:27 pm

Yes, SKY board, 9XR-PRO and the AR9X board.
As a note, the AR9X board uses the SAM3S8 (512K flash) processor, like the 9XR-PRO. The original SKY board used the SAM3S4 (256K flash) processor.

Mike.

LTMNO · Post by **LTMNO** » Wed Dec 23, 2015 2:29 pm

ah got it... kinda like the Taranis... It uses Samba too...

Post by **jhsa** » Wed Dec 23, 2015 2:47 pm

I don't think the taranis uses Samba?

João

LTMNO · Post by **LTMNO** » Wed Dec 23, 2015 2:54 pm

jhsa wrote:I don't think the taranis uses Samba?

João

I think at one point it did with c9x? Not 100% but I do remember something like that... old age is kicking in...

Post by **MikeB** » Wed Dec 23, 2015 3:49 pm

The Taranis and the 9Xtreme use "DFU" (Device Firmware Upgrade) not SAM-BA.

Mike.

Post by **jhsa** » Wed Dec 23, 2015 3:56 pm

LTMNO wrote:
jhsa wrote:I don't think the taranis uses Samba?

João
I think at one point it did with c9x? Not 100% but I do remember something like that... old age is kicking in...

Haa, old age? you?

You are making me feel old now

João

KAL · Post by **KAL** » Tue Jan 05, 2016 7:36 pm

Hi Mike,

I never used the print function but the posts of 'gerhardp' in "er9x development"
about print function in eepe made me curious. So I tried it with eepskye.

I found that using this function causes eepSKYe to crash when sticky throttle cut
(safety switch type 'X') of the selected model slot is set.

To what extent the rest works OK I didn't test so far.

Edit: at least since rev 402, Oct 27 2014

Klaus

Post by **MikeB** » Fri Jan 08, 2016 7:08 pm

I've fixed the print crash.
While there may well be more things to add/change, I have just released eepe/eepskye r419. All the source files are up to date on the master branch on Github and the downloads are on www.er9x.com.
The plan for the future is not to take as long between releases and to just do a few changes between them so it is under better control.

Mike.

Suncoaster · Post by **Suncoaster** » Sat Jan 09, 2016 12:47 am

Mike, the Linux version indicates that it is r420. Just a mention as it makes no difference to the operation of the program.

schliden · Post by **schliden** » Mon Jan 11, 2016 1:58 am

Hi,

I have a 9XR-Pro with stock firmware.

I run Mac OSX 10.6.8

Can anyone advise which version of eepskye will work on 10.6.8 snow leopard ?

Thanks

kaos · Post by **kaos** » Mon Jan 11, 2016 8:18 am

I was trying to open a .eepm file downloaded from a thread there, but when i used eeskye r419 to open it, nothing shows up, there is indication there is window 1, but nothing, no model. How can I open a eepm file?

Post by **MikeB** » Mon Jan 11, 2016 10:05 am

Have an eeprom window open, right click on an empty model slot and select "Load Model Settings". Then select the eepm file.
eepm files are just a single model.

Mike.

Post by **MikeB** » Mon Jan 11, 2016 10:06 am

schliden wrote:Can anyone advise which version of eepskye will work on 10.6.8 snow leopard ?

I don't have a MAC, so can't directly answer. Have you tried some versions and found they don't work?

Mike.

schliden · Post by **schliden** » Mon Jan 11, 2016 10:20 am

Hi Mike,

I can only see the latest version.. (which does not work)

Can you point me to where I can DL some older versions ?

Thanks

Post by **MikeB** » Mon Jan 11, 2016 11:49 am

Older versions may be found here: http://code.google.com/p/eepe/source/br ... vn%2Ftrunk.

Mike.

schliden · Post by **schliden** » Mon Jan 11, 2016 12:16 pm

Mike,

I have tried each version back as far as eepskye.dmg r399. (Mar 26, 2014)

I can't find anything older....

None of them work on 10.6.8 (Snow Leopard)

From the look of the info.plist files the last one was compiled under OSX 10.9

Is there any reason that it cannot be compiled to run on older versions of OSX ?

Thanks

schliden · Post by **schliden** » Mon Jan 11, 2016 12:25 pm

I just tried DL version r396 0f eepe.dmg and that does install and work... but unfortunately, there is no version of eepskye.dmg in this or any older revs ..

Post by **MikeB** » Mon Jan 11, 2016 1:07 pm

schliden wrote:Is there any reason that it cannot be compiled to run on older versions of OSX ?

I have no idea!
Someone else does the compile for the MAC. I've asked them what the situation is regarding compiling for older versions of OSX.

Mike.

schliden · Post by **schliden** » Mon Jan 11, 2016 1:14 pm

Thanks Mike...

Perhaps that Mac maintainer could also advise which minimum version of OSX is required.

betibeau · Post by **betibeau** » Tue Jan 12, 2016 5:50 pm

I have on a TURNIGY9x the v2.4 board from smartiepart. I have exported my models and try to flash onto another Turnigy 9x with the 9xtreme board installed. Unfortunatly I cannot get a usb connexion to the 9xtreme board. EEPE works perfect with the V2.4 board. Where is the trick ? HELP. When I connect my usb cable i see 9Xtreme in the middle of the screen (radio) and r00.3 bottom left of the radio's screen. Does a new driver, or new eepe version must be installed. Or the pinout of the usb is badly soldered ? Thx for a fast feedback. Thierry (BE)

Post by **MikeB** » Tue Jan 12, 2016 6:23 pm

Please keep to just one thread, I've answered on your other post already.

Mike.

Post by **jhsa** » Fri Feb 05, 2016 2:23 pm

Some of you might find this helpful. If you know already how to install eepskye and download the radio eeprom into eepskye, don't waste your time watching it

João

https://www.youtube.com/watch?v=wNJPUZcqZRs

openrcforums

eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepSKYe

Re: eepe v420/v419 and 9extreme board

Re: eepSKYe

Re: eepSKYe