eepSKYe

eepSKYe is the desktop too for flashing and managing your sky9x firmware.
User avatar
MikeB
9x Developer
Posts: 16483
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: eepSKYe

Post by MikeB » Thu Mar 08, 2018 9:50 pm

João: I assume you mean printing, not displaying!
Peter M: Yes, please do post problems.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!


User avatar
jhsa
Posts: 18814
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: eepSKYe

Post by jhsa » Thu Mar 08, 2018 9:52 pm

What I meant above was that there were other issues that required much more attention than printing.. Issues that affect the functionality of eepskye and Ersky9x. I remember seeing this problem before, but I didn't report it because at the time Mike was trying to solve some other problem that was much more important. Then I just forgot.. :)
I didn't mean to say that it shouldn't be fixed, but if there are other problems to be solved, I believe this wouldn't be at the top of the list ;) :)
My 2 cents of course ;)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
jhsa
Posts: 18814
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: eepSKYe

Post by jhsa » Thu Mar 08, 2018 9:54 pm

MikeB wrote:
Thu Mar 08, 2018 9:50 pm
João: I assume you mean printing, not displaying!


Mike
Yes, the logical switch problem I reported above is when we open the printing screen..

Thanks

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
jhsa
Posts: 18814
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: eepSKYe

Post by jhsa » Fri Jun 15, 2018 3:14 pm

Mike, what about if we could also program the voice in eepskye and actually hear on the PC what we are programming? That would need a "Voice" folder somewhere, probably in the eepe directory? This could of course be extended to eepe..
Thanks
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
MikeB
9x Developer
Posts: 16483
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: eepSKYe

Post by MikeB » Fri Jun 15, 2018 10:57 pm

I made a bit of a start to this some time ago. When you run the simulator, you should see the word "WELCOME" appear on the "BEEP" button. This is actually the filename of a voice file. I did have the PC playing that one voice file, but found it too much every time I ran the simulator!

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!


User avatar
jhsa
Posts: 18814
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: eepSKYe

Post by jhsa » Fri Jun 15, 2018 11:02 pm

I think that at least the VA's could be simulated.. probably we could create some simulated telemetry events so we could also program alarms.. Just an idea of course..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
jhsa
Posts: 18814
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: eepSKYe

Post by jhsa » Tue Jul 03, 2018 8:16 pm

Mike, eepskye.

logical switches:

L2 v=val Gvr1 3 Delay 1,3

It doesn't seem to delay. the switch seems to turn ON as soon as the condition is met

it is possible that you fixed this and I have an older version of eepskye? It says r422 from 18th Feb

Thanks

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
MikeB
9x Developer
Posts: 16483
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: eepSKYe

Post by MikeB » Tue Jul 03, 2018 8:44 pm

I included an eepskye in the r222 a8 test vesion, try that one as it seems to delay OK for me.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
jhsa
Posts: 18814
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: eepSKYe

Post by jhsa » Tue Jul 03, 2018 8:53 pm

Yes, it works on the latest one.. Obviously i did forget to update.. Thanks
Been busy with some other projects :) But managed to go to the field today.. nice weather :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
jhsa
Posts: 18814
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: eepSKYe

Post by jhsa » Tue Jul 03, 2018 9:04 pm

Mike, in eepskye try setting a logical switch with a timer set to 0.5 and 0.5 it switches too fast, and longer on the OFF state
I used L2
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
jhsa
Posts: 18814
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: eepSKYe

Post by jhsa » Tue Jul 03, 2018 9:13 pm

Please try this in eepskye.. it is not working as it should.. it does work for a while a after a few times not working :(

L1 1-shot GEA 5.6
L2 Timer 1.0 1.0 AND L4
L3 1-shot !GEA 1.5
L4 OR L1 L3

Thanks

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
MikeB
9x Developer
Posts: 16483
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: eepSKYe

Post by MikeB » Tue Jul 03, 2018 10:13 pm

There seems to be a random problem with a logical switch set to timer with an AND switch. Sometimes, either the ON time or the OFF time gets cut short.I don't think this will be quick to find as the code is the same as that on the radio, but is driven by a Windows timer not a hardware timer. I can't use DEBUG mode as this is running in real time!

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
jhsa
Posts: 18814
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: eepSKYe

Post by jhsa » Tue Jul 03, 2018 10:26 pm

But this certainly worked correctly before. :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
bob195558
Posts: 2031
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: eepSKYe (Editing Model Window being squished up )

Post by bob195558 » Tue Jan 01, 2019 12:48 am

Hi Mike,
Problem after Upgrading my Win-7 decktop with eepSkye Rev. Feb 18 2018 (http://www.er9x.com/).
Having trouble with the Editing Model Window being squished up
and not able to read. :(
When I grab on it to pull it bigger, it will not move.
It is staying squished up. :(
Editing Model Window_a.jpg
eepSkye Rev. Feb 18 2018
Editing Model Window is squished up all the time.


I then downloaded TEST eepSkye Rev. p423 March 18 2018 (https://openrcforums.com/forum/viewtopi ... =91&t=2835)
and used it to replace eepSkye Rev. Feb 18 2018 with same results. :(
Editing Model Screen window_b.jpg
TEST eepSkye Rev. p423 March 18 2018
Editing Model Window is squished up all the time.

-------------------------------------------------------------------------------------------------------------------
I do have a new Lenovo laptop Win-10 and installed eepSkye Rev. Feb 18 2018
and it is working properly. :)

Also on my Win-7 decktop with eepe Rev. 422, Feb 18 2018 is working properly too. :D
--------------------------------------------------------------------------------------------------------------------
Is there something I am doing incorrectly with (eepSkye) my Win 7 op ? :?:
Last edited by bob195558 on Tue Jan 01, 2019 1:24 am, edited 2 times in total.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.

3D Printing upgrades with (CR10 3D Printer): (http://openrcforums.com/forum/viewforum.php?f=85).

User avatar
bob195558
Posts: 2031
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: eepSKYe

Post by bob195558 » Tue Jan 01, 2019 1:17 am

There is trouble with this version too. :(
Editing Model Screen window_c.jpg
Rev. 402, May 12, 2014


But is a little better, as I can make it longer, but not larger up and down.
And some of the windows are not the correct size in some of the tab windows too. :(
And I think some stuff may be missing too (2014 version).
(https://openrcforums.com/forum/viewtopi ... =91&t=2835)
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.

3D Printing upgrades with (CR10 3D Printer): (http://openrcforums.com/forum/viewforum.php?f=85).

User avatar
bob195558
Posts: 2031
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: eepSKYe

Post by bob195558 » Tue Jan 01, 2019 1:56 am

The older eepSkye Version 421, Nov. 21, 2016 is better, but has some things squished together also too.
Editing Model Screen window_d.jpg
Rev. 421, Nov. 21, 2016


For now, I can use this version with my Win-7 (64 bit) desktop computer. :)

The newer versions do not work with my Win-7 (64 bit) desktop computer. :cry:

.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.

3D Printing upgrades with (CR10 3D Printer): (http://openrcforums.com/forum/viewforum.php?f=85).

User avatar
bob195558
Posts: 2031
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: eepSKYe

Post by bob195558 » Tue Jan 01, 2019 6:27 pm

Programing with eepSkye (Win 10) with the 9XTreme/erSky9x,
I do not see where/how to set the A2-PackVoltage Alarms (Yellow and Red) in the tab Telemetry ?

Help !

Eepskye  A2 PackVoltage Alarms.jpg
How to set A2-PackVoltage Alarms in the tab Telemetry
Was Yellow, Orange and Red values
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.

3D Printing upgrades with (CR10 3D Printer): (http://openrcforums.com/forum/viewforum.php?f=85).

User avatar
MikeB
9x Developer
Posts: 16483
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: eepSKYe

Post by MikeB » Tue Jan 01, 2019 7:35 pm

They got removed in R221. Initially they were used to set alarms in a DJT/DHT module. Later, the firmware handled them. When I added Voice Alerts, which allow beeps as well, these very specific alarms became unnecessary. I left them in for quite some time, but decided to remove them in R221.

I'm not sure about your window resolution problem, I've not seen that before. May just be a Windows setting. I came across a setting that caused the FrSky SxR configuration application to display incorrectly at some point.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
jhsa
Posts: 18814
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: RE: Re: eepSKYe

Post by jhsa » Tue Jan 01, 2019 8:41 pm


MikeB wrote:
I'm not sure about your window resolution problem, I've not seen that before.

Mike
Oh yes you did :mrgreen: ;)
Remember a few years ago I said that eepskye didn't fit and it didn't adjust to my notebook's display?

Well, that notebook is on linux (Lubuntu) only now. I can try to install eepskye and see what happens.

João

Sent from my BLN-L21 using Tapatalk

My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
bob195558
Posts: 2031
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: eepSKYe (Editing Model Window being squished up)

Post by bob195558 » Wed Jan 02, 2019 1:40 pm

The newer test Rev. p423 March 18 2018 and Rev. Feb 18 2018 have a bigger problem
then the older eepSkye Rev. 421, Nov. 21, 2016 does with Win 7.

Win-7 64 bit, Monitor Screen Resolution: 3840 x 2160
-------------------------------------------------------------------------------------------------------------------
Win 10 is working properly.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.

3D Printing upgrades with (CR10 3D Printer): (http://openrcforums.com/forum/viewforum.php?f=85).

Suncoaster
Posts: 226
Joined: Thu Dec 29, 2011 10:18 am
Country: Australia
Location: Cooloola Cove, Australia

Re: eepSKYe

Post by Suncoaster » Thu Feb 21, 2019 5:53 am

Mike, I cannot edit a switch used in a mix. The dropdown list box is not populated. This is version P423 dated 26/01/2019.

User avatar
MikeB
9x Developer
Posts: 16483
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: eepSKYe

Post by MikeB » Thu Feb 21, 2019 9:58 am

Which radio? The switches dropdown is populated differently for different radios.
Mine is OK on SKY, 9Xtreme and QX7 I just tested (although I built mine a few days later). I'll check the version you have later today.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
MikeB
9x Developer
Posts: 16483
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: eepSKYe

Post by MikeB » Thu Feb 21, 2019 4:34 pm

That version did have a problem with some radio types. I've just posted an updated version (for windows) that doesn't have the problem.

It seems the editing window may appear "squashed" at times due to the (default) screen font. I'm looking into that.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
bob195558
Posts: 2031
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: eepSKYe

Post by bob195558 » Thu Feb 21, 2019 5:48 pm

So the problem may not be the monitor screen
resolution, but the (default) screen font.
Thank you Mike for looking into this !
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.

3D Printing upgrades with (CR10 3D Printer): (http://openrcforums.com/forum/viewforum.php?f=85).

Suncoaster
Posts: 226
Joined: Thu Dec 29, 2011 10:18 am
Country: Australia
Location: Cooloola Cove, Australia

Re: eepSKYe

Post by Suncoaster » Fri Feb 22, 2019 2:12 am

MikeB wrote:
Thu Feb 21, 2019 4:34 pm
That version did have a problem with some radio types. I've just posted an updated version (for windows) that doesn't have the problem.

It seems the editing window may appear "squashed" at times due to the (default) screen font. I'm looking into that.

Mike
That fixed the problem, thanks once again for the quick response. In future I will remember to give you the additional detail about the radio.

Dave

User avatar
MikeB
9x Developer
Posts: 16483
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: eepSKYe

Post by MikeB » Fri Feb 22, 2019 1:04 pm

bob195558 wrote:
Thu Feb 21, 2019 5:48 pm
So the problem may not be the monitor screen
resolution, but the (default) screen font.
I've posted a test version where I'm allowing the window to be sized larger and that also puts in scroll bars if things don't fit. Please try this (but keep your existing version in case you need to revert) and see if it avoids the "squashed" display.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
jhsa
Posts: 18814
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: eepSKYe

Post by jhsa » Fri Feb 22, 2019 2:25 pm

Cool, must try this on my notebook. Never seen the bottom part of eepskye on that computer. It runs Linux though :(

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
bob195558
Posts: 2031
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: eepSKYe

Post by bob195558 » Fri Feb 22, 2019 2:46 pm

Hi Mike,
I am having trouble finding the eepSkye test version Feb 22, 2019 (for windows).
I believe it should (may) be posted on the first posting of this string (eepSkye), is this correct ? :?:
(viewtopic.php?f=91&t=2835)
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.

3D Printing upgrades with (CR10 3D Printer): (http://openrcforums.com/forum/viewforum.php?f=85).

User avatar
jhsa
Posts: 18814
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: eepSKYe

Post by jhsa » Fri Feb 22, 2019 3:12 pm

My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
bob195558
Posts: 2031
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: eepSKYe

Post by bob195558 » Fri Feb 22, 2019 3:33 pm

:D Found it here:
(viewtopic.php?f=7&t=4676) "Ersky9x Test Versions" .

Suggestion: May need a note on the first posting (this string), directing where find "eepSkye test versions"

Thank you Mike, I will try this new test version soon. :)
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.

3D Printing upgrades with (CR10 3D Printer): (http://openrcforums.com/forum/viewforum.php?f=85).


Post Reply

Return to “eepSKYe”